• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 197thhhc

    Gentlemen need your help

    Huh :?
  2. 197thhhc

    Deuce Battries

    We use 24 series batteries in our deuces and have never had a problem. We fit three in our battery box to run a 12 volt system for our electric winch.
  3. 197thhhc

    Problem after replacing battery

    11 volts is not good a battery should sit at 12.5 to 12.9 volts just sitting. If you put a multimeter on the battery while its cranking its probably going down to nearly nothing. I use 24 series batteries in both our deuces they aren't expensive and they last a good long time. But you have to...
  4. 197thhhc

    Is running a singled dually rim on a trailer a bad idea?

    If you were going to use this trailer commercially or for very heavy loads I would be concerned about flipping the wheels. For just regular short trip hauling I would'nt have any issue with flipping the wheels.
  5. 197thhhc

    Please don't be this guy(pics inside)

    The guy in the video is a genius.[thumbzup]
  6. 197thhhc

    Please don't be this guy(pics inside)

    Sometimes you just gotta go for it. You cant be a p***y all your life. Honestly fellas is this the PC section of the forum. Most MVers are far from politically correct.
  7. 197thhhc

    Wanted: opinions on our custom mirrors

    I will put up pics tonight.
  8. 197thhhc

    Wanted: opinions on our custom mirrors

    They are actually not as far out as the regular units but I do like the idea of a shorter version also. Thanks for the input.
  9. 197thhhc

    Wanted: opinions on our custom mirrors

    You are right about the woods. thats one reason we made these. We like to go to Haspin and other places. You can take these off in less than 5 minutes and when you put them back on they are still adjusted.[thumbzup]
  10. 197thhhc

    Wanted: opinions on our custom mirrors

    I will look into a westcoast syle. Thanks
  11. 197thhhc

    Wanted: opinions on our custom mirrors

    Thank CavDog. We have been running them for a couple weeks in daily driving and so far so good. We really want to test them completely.
  12. 197thhhc

    Wanted: opinions on our custom mirrors

    We have come up with a simple yet heavyduty mirror and mount. We are thinking about putting these into production in a complete kit form. We mounted this set up on our test mule. We have taken them down the interstate and they dont vibrate because of the very heavy duty top bracket. We...
  13. 197thhhc

    Let the Bobbing begin

    This is a video from what we did last weekend . We reassembled the rear suspension and axle and fitted it under the truck. We tried to add a couple of special touches to the frame. We angle cut and boxed both ends and if you notice in the pictures instead of just notching the front crossmembers...
  14. 197thhhc

    And Yet Another Way To Bob A Deuce!

    Very nice looking truck . But its been awhile where is your next project pics
  15. 197thhhc

    Let the Bobbing begin

    Here is another update video We will have one for the rear suspension installation soon.YouTube - R.C.T. Deuce 5-3-11 Rockwell Edition[thumbzup]
  16. 197thhhc

    Cleaning up spilt Trans fluid

    Purple power degreaser is available at Autozone in gallon jugs. It is very good at breaking up oil stains.
  17. 197thhhc

    Just to say Thank You

    Welcome from the great state of Ohio
  18. 197thhhc

    Newbie from NM

    Welcome from Ohio. I didn't understand your hitch idea until I saw the pics of your truck with your camper. That is a really good idea. Did you sleeve the bolt holes where the bolts go through the tubing. That would be my only concern. [thumbzup]
  19. 197thhhc

    Let the Bobbing begin

    Had a busy weekend. Got the rear suspension reassembled and mounted and the rear axle. We completely disassembed the M105 frame and suspension and stripped them. They came out nice. Here is a few pics from today and part one of the latest videos. There will be more videos this week.YouTube -...
  20. 197thhhc

    Let the Bobbing begin

    that is a nice looking truck. I really like the 2 tone wheel look.
Top