Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Would an AS-3900 antenna be the correct one for these sets?.
Found this info
http://digitalcartography.com/n0eq/AS3900.htm
and this
http://www.valcom-guelph.com/products/AS-3900A_VRC.html
Took the bolts out and it adjusted fine.
The rattling noise is much quieter but is still there. Do these compressors fail often or do most of them make similar noises?. When it is not pumping it is very quiet.
Wouldn't want to replace it if this is the norm.
Thanks Sandcobra. I can get the wrench on with the bolts in place I just have to remove it to tighten or loosen the 3/8 bolts. I thought I had to keep the spanner on to hold tension on the belt while tightening then tighten the bolts, like on an old Chevy trk, which is impossible with the...
I just tried this and it looked like the pump has a large thread on the end of it and the pulley is threaded?. Anyway the pulley moved about 30 deg clockwise. I tightened the the 3/8 bolts and started it. I think it is much looser now as I have noise, a different, larger ball bearing noise and...
Trying to stop my compressor "rattling" as well. I don't see any brackets to adjust the belt tension so I suppose it is all in the bolt on the pulley???.