Search results

Thanks for replying, but I'm pretty sure it's not pipe thread. Best I can tell at this point, is that it's 1"-14, but I need someone to confirm that.

Hello, sorry if this has already been gone over, but I'm looking for the thread size/pitch of the threads on the top of the spring on a MX-6707. Thanks Mike

Thanks Kurt... good info! 1976 Pinzgauer 710K

Just learned of the existence of a cool little RTTY machine, the UGC-74. Looks to be a good compact size for MV installation and playing with ham radio RTTY. Anybody have experience with one? Pros? Cons? Words of wisdom to a possible buyer? Spec I saw says it needs both 28vdc and 115vac. Is...

Mark, thanks for the reply. Good info!

Just curious, but could this teletype machine be utilitez with a modern HF ham radio? Thinking it would be cool to be able to send/receive text over teletype using HF

I'm looking for an AM3597C/A microphone amplifier. Also a M87/AIC mic if one is also available Please let me know if you have one... Mike

You might try CHIRP. It's a free downloadable programming software. I suspect you would select one of the Baofeng radios in the program, as the TRI radios appear to use the same or similar chipset.

I've got a VIC-1 system setup in my vehicle. I only use it for intercom, but have a civilian CB radio's audio connected into the "AUDIO INPUT" wire terminals. No MIL radios installed. I can listen to the CB while wearing headsets, but must still use the hand mic to transmit. I've also got an...

Wow that's cool. Did you need to get some kind of permit to do that? Did the fire dept. have to be present?

cjtroutt... are you the US rep for Monda Int'l? Are you an exclusive importer for these radios? What do you mean by "price is still on the fence"?

cjtroutt, are you an importer of these radios? Are you in the USA? If yes, and you sell the 117, what is your retail price and availability?

I would love to have one of these -117 rigs for my MV, but it's way overpriced IMO, and it definitely seems to use the same chipset as the Wouxun/Baofang handhelds. I have both of those radios and their menus/memory functions can be frustrating to navigate through. I was kinda disappointed to...

Okay thanks. Is Steve a member on the forum here?

I have an AM-1780 main unit that will not power up. I took back cover off and found two caps blown, and am hoping if I replace them, I can get it working again. The two caps are on J501 (upper.right side) I'm hoping someone can look at a good unit or a schematic they have and tell me the...

Thanks guys!

True enough. I'm gonna have to make some kind of cover for it, or enclose the whole shebang in a box.

I will check out PowerStream. Thank you

I found a relay today at a local electronics parts place. It's an NTE R04-11D30-24. A lot heavier duty than I probably need, but that's okay with me. Now I just need to find a 24v battery isolator...

I was in the market for a Tractel (tirfor) GripHoist, and then I learn that J.E.T. makes the same type of tool. Does anybody have experience with the JET brand? Are the JETs just re-branded Tractels? Any difference in reliability or build quality between the two? I appreciate any feedback... Mike