Search results

M931 is not going to like 94,000 then you wont like the 931

Welcome George, I come up to cedar park every once in a while and use the pool when we are training new divers, good luck on the hunting.

I put two WalMart batteries in all of my trucks, never have had a cranking issue, 3 year exchange at any Walmart in any part of the country.

Thanks, I know its not good to use it on the CUCC's, but I have before as a last resort to start one. I let the glow plugs warm up the cylinder first and only interduced the either after the glow plugs end the heat cycle, but it always sounds terrible. I was just wondering why and know I know...

Not sure why its ok to use either on the 5Tons but not the CUCV's while starting

Cool trip

What was the reason for a filter for the coolant?

Ok, By disabling the controller card do I miss any benefits or not

Really cool, Where did you get it, what kind of shape was it in and what kind of motor

I have done several and I unhook the blue wire, Do I not need to unhook the blue wire?, All of mine work fine the way I have done it.

I picked up a deuce with the same smashed fuel line problem, I took it off and went to napa. They bent the new copper line identical to the original line for me (minus the crushed part).

Try some either, It will save you from draining your batteries

Thanks, Ill check mine there, got one that flashes also

nice truck

DUKW = 35 mph,,,,,,CUCV + DUKW = 30 mph, Priceless

Warthog, You the man. Took out the volt gauge and I guess the army replaced the gauge and used a metal bracket to hold the gauge in instead of the plastic one, didn't have a plastic one but got it rigged up and it works great. Much thanks, Donny

Well followed the instructions and the fuse blew when I put the rely in (closest to the starter relay.) Took out relay put another fuse in and installed the other rely (farthest away from starter relay) leaving the first relay socket empty. Did not blow the fuse, Put the second relay back in and...

Newly acquired M1008 has a problem, it is blowing the fuse for the charging system in the fuse box. Its the bottom fuse marked 28V, I have tried fuses from 10amp to 30 amp, keeps blowing them as soon as the key is turned on. Truck starts and runs perfect but the volt gauge doesn't work, that...

IP pump most likely

Nice trailer, is it a military or civilian