Search results

Never seen a five ton with a custom paint job.maybe this could be the custom paint job thread!

I think it should be green instesd of blue, and I dont like the headlights,the wheels are cool.It kind of grows on you.

Whatt!!!

Very cool! I think the it would benefit with some cross braces,imo.

Yo don't want the metal too hot,if the paint dries too fast,the adheasion will be reduced. I set up a big tarp over head to keep the sun off and that worked well.You can buy a 29'x18' camo tarp from harbor freight for this purpose.

I run 80 psi in the front 11- 20 xl's on my m35a2 ww, 50psi in rear with duels,seems to be working. You may have some moister in the brake fluid/system,the high heat would cause it to exspand.

Good times Rick! can't wait to do it again!!!

Yes Don,it has a heater with a defrost!! The truck is 99.99% done!! I'll be changing out the old sprag tc with an air shift one before the GA rally this year. :grd:

Thankyou sir! I too would like to find a m275,some day I'll snag one! Thats a lot of big tractors you have there!!

I think LDT.

A year between rally's,is a long time to wait. Here in central Florida,we have 5 a year!

Isn't gl 1 the proper lube to run in the deuce Trans and transfer case and not "gl 4”? napa carrys the gl 1 in gallon containers, gl1 is yellow metal safe.Don't be suprised though if the napa auto parts guy looks at you crosseyed when you ask for it. It's in their book.

Today I drilled the hole and installed the on/off switch for the beacon light, and wired it all up,this light is awesome! I think it will be very useful,at least a real croud pleaser!

There is a rebuild tag on the r side of the multifuel engine block if it has been rebuilt!

The dimension from the back of the cab to the 5thwheel will be the same on the deuce tractor conversion as the m818 tractor, so there may not be a clearance issue.my m146 trailer weights just under 10k lbs, on flat ground,the multifuel does just fine,but it's a bit of a challange pulling a...

I have used both smart phone and laptop,I like my smatphone best,need to get 4G phone with the large screen.only some phones will post pics without tapatalk.

Thanks for the props Tad! I think that an a3 conversion would be baddazz! You could use a sliding 5th wheel,I think their about 6" lower in height over the standard military 5ton 5th wheel, but you probably would not need the sliding feature to adjust weight over the axles,i like the 5ton 5th...

Installed a beacon light! Working on hooking it up,thanks for the on/off switch Pete!

Lot's of parts sold on Ebay for the m35a2 are Chinese or Corean.

Here's a can mount that goes on the pass side step,I bought this one at the 2010 Ga rally for 25.00,it was the only one there and I've seen only 3 in two years and one went for over a hundred dollars on Ebay,so good luck finding one,but they look easy to fabricate.