Search results

I hope you have a padlock on those LED headlights Rick. They would look cool on my Blazer.

I'll be the first in line to take it off your hands in a few months. Great job.

Don't bother with the drive shaft; It looks like you cant get it out the door now.

As cpf240 mentioned, you may want to check your injector lines. I thought I had a rear oil seal leak but it ended up being a fuel leak and it ran down the back of the engine and out the drain at the flywheel

To bad you sold your tarp kits. It would have looked good on Mr. Rusty

Rick, do I see some wheels turning?

I assume I had the better way.

Start with checking your glow plugs first, you may have a bad one. If they check out ok than move on to the card like jterry suggest.

Was that your problem?

The Thread title was M1009 Rubber Antenna Grommet so I assumed you were talking about the grommet that enters the blazer fiberglass top"1/2"+-. For your application it should be fine.

I don't think that those will fit. B & E dimensions are way to small.

I mounted mine on top of the dash mounted radio rack in my M1009. I used an angle bracket screwed to the rack face plate than screwed it to the CB mount bracket. The CB actually rest on the dash with the mike hanging in the original radio rack slot. No mike bracket needed. Only problem is the CB...

Ouch that hurts

Why were the cables missing in the first place? Did the previous owner try to convert to 12 volt? If so watch what cables you reconnect or you may burn something up.

If you don't buy it I will. They are great trucks and that one isn't even broke in yet. I bought mine in 2011 with 70,000 on it for $2600. Did some body work added accessories and have about $6,000 in it now. I drive it every chance I get "in the summer" and wouldn't trade for twice that.

Welcome from Cooperstown. Looks like a great buy.

Your wife or the M1038?

Rick Are you doing all this just to sell to a new owner or do you plan on keeping it as your personal show piece? Either way it looks great.

That looks great. Nice job. Now that I see yours in camouflage I think ill do the same when I repaint. Where and how are you going to mount your license plates?