• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. EMD567

    Cookout at Zout's

    That would be something, watching a jumper miss those high tension power lines. My wife says she is an expert nanner pudding taste judge. She never passes up nanner pudding. Never.:jumpin:
  2. EMD567

    planning my m818 recovery

    Make sure you go though your fuel system with a fine tooth comb. Air leaks were 90 percent of my problems with the 814.:jumpin::mrgreen:
  3. EMD567

    M52A2 recovery from Ft Jackson

    Sounds like you had a good trip. Glad Mr Murphy stayed away.........
  4. EMD567

    What have you done to your 5 ton this week?

    Just finished up fixing the convoy light so that it doesn't bounce around like a jack in the box, and then took the dash apart, cleaned up all my gauges, and reassembled. Gauges look brand new now.:mrgreen::jumpin:
  5. EMD567

    Cookout at Zout's

    Since then I have finally put a lock on the lid. Locks are only for honest people. I can be very dishonest when it comes to BBQ.........:mrgreen::jumpin:
  6. EMD567

    Should I?

    Vancouver to Prince George, then take the west road to upper Liard, from there to Carcross, and up into Alaska.
  7. EMD567

    Should I?

    I would stay in the conus as long as I could before going into Canada. Fuel is crazy expensive. I would either take the ferry, or drive to Vancover, and go north from there.:jumpin::cookoo:
  8. EMD567

    Stupid Zone inspector

    So what do they do about a chevy or ford or Dodge 1 ton truck? Or an M37? Or even, god forbid, a fully loaded caddy?
  9. EMD567

    Louisville Ky bound!

    So now we need a deuce with oil pouring out of the pan onto the ground, to match the pic of the deuce on it's side............:mrgreen::jumpin:
  10. EMD567

    2 M37s Saved from the scrapper

    WWWWAAAAAAAHHHHHHHHH I am always at the wrong place at the wrong time........... Good save Papa Bear.........:jumpin::mrgreen::-D:driver:[thumbzup]:beer:
  11. EMD567

    M809 Series Radiator Hose Part Numbers?

    You won't find the lower hose at any civi parts house. They just don't stock it. I got mine from Ericks Military Surplus.
  12. EMD567

    2012 Haspin BS/parts thread

    I don't have a cameo net big enough to hide the M814.
  13. EMD567

    Deuce on a rollback

    I'll bet almost every full cab MV will be over height when on a rollback.
  14. EMD567

    What do your neighbors and other drivers think of your CUCV

    My 5 ton gets lots of stares from folks. One lady asked me why? and I replied why not. Taking care of the 5 ton keeps me off the golf course, and outa bars :jumpin:
  15. EMD567

    I got the M814 home. Now what?

    Well, it has been a few months since I have posted here. The 814 has been running fine, even after I tried to tear it up at the Ga Rally, by going into the woods. She came with a heater kit, and the heater core was rotten from bad antifreeze. I have been looking, for quite some time, for...
  16. EMD567

    Fort Gordon

    Depends how quick- I can only get over there on Fridays.
  17. EMD567

    Bio Diesel.....?

    My NHC 250 can't tell between 100% bio and the ulsd pump fuel with 2 cycle or filtered WMO added at 10%. Mr Cummins DOES NOT LIKE pure ULSD.:jumpin::mrgreen:
  18. EMD567

    full shut off solenoid on NHC250?

    Just found out- Gold colored is old, Black is new.
  19. EMD567

    full shut off solenoid on NHC250?

    That I don't know-I have never compared the two side by side. I think mine is all metal, but I am drawing a blank right now. I will go out and look tomorrow.
  20. EMD567

    Our First MV's Recovered - Now on to Maintenance & Updates

    THe cargo cover could also be for a M814 5 ton. Just how long is the cover? M36 is 17', M814 is 20'
Top