Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have two spare NOS injectors and want to make sure I can use them if needed. Getting conflicting info on the web. I have a 1991 M998 that had a refit in 2008 and has a GM 6.5L naturally aspirated engine. I need to know can I use these injectors? Some info says for the 6.2 and others say either...
Have two NOS I believe for the HMMWV bottom seat pads in boxes that I have no use for. $40 a peice plus the ride. I'm going to bring them up to the Weare NH show tomorrow. Let me know.
Thanks,
Mark
The Patton homested military service day show is this Saturday the 19th in Hamilton massachusetts. It's a great show on a beautiful estate. Been going there for years.
Mark
Patton estate show Hamilton massachusetts
MEP831A generator. 30 gal fuel drum, Iris 24v 1800w inverter. 200ah battery backup and next is 400w solar system. He is also installing power and communication underground cables to run to the house for 220v transfer.
Found the below on Facbook today. Looks real nice. Can't pull the trigger right now myself but sure wish I could. It is a 4 wheel steer but I don't know beyond that.
Mark
https://m.facebook.com/marketplace/item/2215254702011113/
About seven plus years ago I modified my lunette ring on my M101A2 trailer. I needed it to be adjustable so I got all the parts necessary and cut off the old ring. It's been a great mod then yesterday on flebay I find this tan unit amd it's exactly the same setup I made. I had no clue the...
Don't know what the proper name is but the little dash vent slider knob on the pass side of my truck is missing and I would like to find a replacment. Any help would be much appreciated.
Mark
Had my outer pass front CV boot fail. It had just happened so all the grease was still on there and no water.
After doing some measuring and then research I found the proper speedi boot for our 10k outer CV shafts. Quick install and repacked with grease provided. I like these speedi boots...
This must have very recently happened still full of grease and only a 2" cut. I know I should just replace the CV shaft but for now I just want to replace the boot with a split boot. I understand it won't last like the proper one. I have the 10.2 shaft setup M998A2. My question is does anyone...
I saw on Flebay someone is selling an M1123 with a 30kw gen mounted between the engine and transmission. Anyone have any info on this setup as I was unaware of this. Very interesting.
Mark
Hello all,
Changed out my yellow label start box. Barrel relay was jammed on so it was constantly sending 24v to the plugs. I have another known good box same yellow label Natrona but could someone please explain this afterglow function please? Mine comes on at 20v then the dash light goes out...
Hello all,
Just finished replacing all the glow plugs and it was a true PITA. Broken tips, No room to work. After all this I tested the box. Light came on for approx 7 sec went out Heard a relay and I still had 24v going to the plugs. I had a meter hooked up to a glow plug. I have a Nartron...
Buddy of mine just picked up a real nice MEP-831A and need to find some correct matching paint. Going to use it just for touch ups by brush. Any help would be much appreciated.
Thanks,
Mark
I know the foot basket will stick out but can you still close the tailgate? I understand on the M101A2 trailer you will have to drive over one of the inner fenders. Would really like to buy a mule but need to store it in a trailer. Thanks for the help. Also maybe drive it in and have the foot...
I have a light bar on my M998 and it virtually blocked the passenger side stock mirror so I installed mirrors on the X-doors with the 3D printed mounting plate on the upper hinges. Thank you Midwest Military Equipment and I give this part a 5 star rating. I expect a fruit cake this X-Mas for all...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!