Search results

Looks good Carter. In fact, it looks close enough to my M101A1 that I suspect many folks would not notice the differences between them unless they looked closely... Photo of my factory brake handles for comparison: http://www.garbee.net/~cabell/december/M101A1/DSCN0766.JPG

RE: Re: RE: Sept/Oct trailrides in North Carolina The SERFE (Southeast Regional Field Exercise) will be at Uwharrie National Forest, located in central North Carolina near the town of Troy. Date The SERFE regional Field Exercise will be held the weekend of October 10-11-12. Dave plans to...

The yellow nose is a distinctive feature of all trucks in 8th Trans Grp. The distinctive yellow stripes were employed to help the commanders orbiting above in helicopters identify which units convoy he was looking down at, so they marked them all... As an example, notice the shots of the M37...

I did the same thing (and renewed the top of the fenders with stuff 3x as wide) with the 3M product sold at Agri-Supply... Price was surprisingly low considering... :) It's been holding up well over the past year.

Frank, I've gotta say that you are comming across just right in those interviews. :) Calm, articulate, and patriotic (and with a great shirt as well). It looks like the bulk of the folks in your area are behind you, as are we. Wish I was closer, I'd drive up in the five ton for the...

I know that this is the same weekend as Clinto's rally, but I thought that I would cross post it here for those folks who live near the rally site in WV who may not be able to make it to GA, but who'd still like to get out and ride... Mid-Atlantic Power Wagon Rally Wild & Wonderful West...

RE: Re: RE: Re: RE: head lights I have been running Hella H4 E-code assemblies on all my stuff for years... even have a page on my website that discusses part numbers and such for the housings, bulbs, and wiring adapters... Best prices that I have found for 6/12/24 volt H4 burners is at...

I have two towbars in Raleigh... AMGeneral has at least one located in Hickory...

Isn't that Clinto's driveway?? I've never seen it in the daylight, but I did back a five ton down it at night and in the rain once... That's a really good looking rig in that photo... The trailers do seem to be conservatively rated, especially when you consider the use that they are...

Instead of lopping off the military plug, consider just unpluging the cable from its junction to the main trailer harness at the tongue and putting it up for sale here (or donating it to a MV owner near you who may need it for a trailer). That way, you will have numbered wire ends at the main...

Re: RE: Sept/Oct trailrides in North Carolina Well, that makes things interesting/difficult... I guess folks that are interested in voting, etc. on the date/campsite will need to register (the form to do so pops up when you try to follow the link), then scroll down to get to the correct...

The M715 guys are going to get together in Sept or Oct for a ride at Uwharrie NF. They hope to get a date set in the next few weeks (no later than the end of this month). They'd like to include any of us that would be interested in ride at Uwharrie since they love MV's of all types, not just...

Here is a shot of a M151 heater mounted in my M37 (the photo that was used, once again, to sell one on Ebay) that I have on my website. I also have a couple of pages on the site with instructions for utilizing the full kit from a M151 in a M37 so that one has defrost as well as heat (since the...

Last time I purchased a kit, (it's been a few years) it was something like $100, and the heaters were selling by themselves for around $45... A fellow just sold a bare heater on Ebay (using a photo from my website showing the unit installed in my M37--didn't ask before he did, but then, he...

Re: RE: Gl suprise bonus At two of the sites that I frequent where they unload with the forklift, they don't have a ramp for unloading and frequently the trucks don't run... Using the fork is much more efficient... That said, I've watched the guys operating the forklifts and, in general...

Re: RE: M37s and their trannys You've got it... :)

Both the NP88950 (M37) and the NP420 (M37B1) are only synchronized in 3rd and 4th. You have to double clutch when going into the lower gears, but most folks usually start off in second when driving around so so shifting is pretty easy... They only have one clutch... Partially synchro'd and...

I've thought about this a lot, but didn't like the routing that a hose (or pipe) would take... If tucked up high enough to not get snagged when going over obstacles (I know, it's up there, but I'd hate to high center my M817 and honk my fuel line) you'd not be able to utilize all the fuel in...

If you want a really nice heavy duty wiper that can handle snow, you might want to consider some units similar to what I mounted on my Cummins powered M37... Granted the M37 is a 3/4 ton, but it uses the same inner window frame... Page on my website details instalation and has parts numbers...

RE: I found some tires Post a wanted add here for a spare. Also post one on the www.g741.org site (the M37 specific site) and the www.503.com site in the Power Wagon forum and in the 3/4 ton trailer forum, and one of the www.dodgepowerwagon.com forum and one on the...