Search results

I really wish my data plate looked that clean. Mine got wiped out by paint stripper…

I believe the answer is the PTO. I Don’t think the NP 208 can accept the PTO. The NP 205 can. PTO was needed to drive the generator in the M1031s.

Could be. :) LOL

NAPAONLINE.com may disagree…

A question for the community. Which gasket or seal fails to cause fluid to flow from the thm400 into the transfer case? thank you to all who answer

Good evening all. Back into the fray…. I suspect I am having transfer case to transmission gasket and seal issues. The dipstick on the trans shows full when cold, I removed the fill plug for the transfer case and almost took a cherry juice shower. So, now I am collecting parts to reseal...

Here is the mounting plate in the 34p that shows how it is attached to the dash frame

14072415 is the part number for this item. NSN is 5340-01-164-6524. 14072414 is the metal plate welded to the dash frame that the pictured item bolts to.

34p graphic and listing. No idea where to source one. Mine had been cut out.

I found the part in the 34P, 14072414. Did a quick search sesrch and located this. Do not know if it helps but here is what I found.

Thank you all for the likes. I purchased the dashpad from LMC.

Exspensive, but well worth it. This was really interesting to learn. The glass guy would not do it. Youtube to the rescue! i made a better battery disconnect switch plate than the fire department. Theirs was functional and expedient but I prefer mine. There is still much to do. All the...

Most of the following pictures are self explanatory, but I will comment as I reflect upon them. I took as far down as I am able. Good and green again. I put roll on bedliner on the floor pans before painting. It feels good to be putting things together rather than disassembly.

I have been very busy in the last three months. The balance between family, work, and hobby have been shifting a lot. Family has sadly been on the short end of the stick. I am working to correct the imbalance. I have gotten a lot accomplished on the hobby side. I have learned how to rebuild vent...

Hello All! we had a nice Veteran’s Day parade in Inverness Fl today. TheNational guard brought out an upsrmor Hummer, and I managed to get my M1031 drivable just in time. I love having the storage capacity for all of the gear we need for the Cadets to march in the parade.

Good to know. There is one near me that has the 887 body on it. He wanted 6k 18 months ago.

I am curious. What was the difference between the m887 work box and the m1031 work box? Did the m887 have the gasoline generator? I have seen some m1031s with PTO driven gens and some with gasoline gens.

I have an M1031 with single rear wheels. This is what I found on wikipedia: The M1031 was the chassis cab. These latter trucks were all rated for heavier 3,600 lb (1,600 kg) or 3,900 lb (1,800 kg) loads, compared to the M1008s 2,900 lb (1,300 kg) load capacity. The M1028A2 (converted M1031 or...

If you look at the bottom adjusting bolt on the power steering pump, the bolt takes a 15 mm socket. BUT, on the other side of the bracket is the “nut” that the adjusting bolt threads into. You can put a 15/16 socket on that. Then use a ratchet strap from the ratchet and socket to the outer tie...

I still use the one in mine. I list it as an antitheft device with insurance.