• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. P

    New soldier, new steed

    Welcome aboard!!! I am sorry for your sickness.:-D There is no cure and the only relief is to buy more and more and more--------
  2. P

    Been sittin' awhile- How to start?

    I'm sorry, I thought we were talking about a duece. Going back and looking at you avatar you must be talking about a Blazer. You could still have some stuck parts but I dont know anything about the Blazers. They have an electric shut down could be bad.
  3. P

    Been sittin' awhile- How to start?

    Yes, its easy. there is a coverwith two screws that the shut down rod sticks out if. The pull cable is attached two it. Remove two screws and the cover. You will see two more screwa with a tie wire in them. Between the screws on the bottom side is a small lever. work it with your finger...
  4. P

    Been sittin' awhile- How to start?

    When the motor is turning do you get smoke out the pipe? I started one yesterday that had been sitting for years. First attempt no smoke but I let it spin to build up oil pressure to get it lubed before starting. I suspected the shut down lever in the pump was stuck in the off position...
  5. P

    need help buying

    You can get some good deals on GL. It is best to inspect first if you can. I got lucky with my Duece as I bought it site unseen. It was the worse looking one on that sale. The bed showed patches and rust. The other 12 were fresh out of rebuild so thats the ones everyone wanted. I got it...
  6. P

    New guy from Kansas

    Welcome aboard!!! Mention it to her every day, sooner or later she will so, OH what the he??, just go get one and shut up.
  7. P

    Offical 2009 Florida Rally Parts Swap Thread

    Derek, go to the rally section and look at the Fl Rally. It will tell you everything you need to know.
  8. P

    Rally 2009?

    Unicoi sounds good to me.
  9. P

    New here from northern indiana

    Welcome aboard!!!!!
  10. P

    Hello from a nozzlejockey in GA

    Another Ga. boy!!!! Great, welcome aboard, and by all means strat planning for the Ga Rally.
  11. P

    Master cylinder problem??

    They are easy to rebuild yourself. Get a cylinder hone from the auto parts store and polish the bore. If it polishes out smooth and shiny install new cups and you are good to go. The last two I did would not clean up so I got a new one off e-bay for $55.00 and a second good take-off at the Ga...
  12. P

    Deuce recovery from FT Stewart

    Kenny, Bob still has a way to go but he is catching up. I have added two Dueces to my stable that I have not talked about yet. They sat at a military surplus store in Savannah for years until the city ordered him to clean up. He did not comply so the city had them towed. Tow yard owner...
  13. P

    Deuce recovery from FT Stewart

    Mistaken1, my trailer is rated 20'000 lb gross weight but I have had a 24'000 lb payload on it with no problems, just be real careful about stopping. I know thats not a good idea but I was hauling baled tobacco from the farn to market. I pull it with a 98 Chevy 1 ton dually crewcab with the...
  14. P

    Deuce recovery from FT Stewart

    Thanks Clint!!!!:-D
  15. P

    M151A1 Price Question

    This thread is two years old. But we have a brand new member who is reading all the posts as has been instructed by the old hands for the last couple months. Maybe he did not notice the dates in his inthusasion for what he has found. He is contributing his knowledge to what for him is a new...
  16. P

    M151 Identification??

    The motor is an A2 because it has a mechanical fuel pump.
  17. P

    Loaded Deuce (pictures)

    Good looking truck. And a Happy New Year to you.
  18. P

    Deuce recovery from FT Stewart

    adding pictures
  19. P

    Deuce recovery from FT Stewart

    My Friend bob130ab recently won two Dueces on GL. One was at Warner Robbins abd the other at Fort Stewart. He drove to Robbins and inspected the trucks before the sale. There was only one at Stewart so since it was so close to us he did not inspect but put in a max bid early in the sale at a...
  20. P

    Should I buy it?

    Very good price. If it were close to me I would snap it up. Lots of parts out there. You usually can get carb kits and NOS carbs on e-bay. Watch e-bay often and you can get some good deals. I buy spare parts for mine when they come up cheap. I even got three NOS motors off e-bay and they...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks