Search results

I would say you may have a hose clamp that may need tightened up. Also welcome to the site.

Thanks! that is good to know you can use that type of hose.

Nice!! Thanks

FYI, I would not replace the one on the front service if you have one there. If it gets closed your brakes will slowly lock up. Don't ask how I know that.

Ok, Let us know how it does.

Nice video thanks! I do have a question about the output hose on the compressor, is it going to be able to take the heat form the compressor? I know on my trucks the copper output line gets very hot when the compressor is running.

Have a safe trip!!

I think you just have to replace them. I have seen a lot of them that leak. Just try to keep good seals on the glad hand and that will help.

My M936 has a little hatch cut in the bed above the transfer case, I guess it is for lifting the transfer case from the top then letting it down to the floor. On my M936 it is under the spare tire.

Good looking truck!!

I have not seen your problem, but to answer your questions. I would say it is on its way out for sure. #1 Yes there is bearings that maybe going bad. #2 Yes the transfer cases are the same, you would have to move the PTO from the old one to the new transfer case. Castle Bravo here in AZ has...

Mark, I have not seen a diagram for the hydraulics for the M936 there maybe one someplace. In the back of the last manual there is some for the air and elec but no Hyd.

Well that is not good. If you can take the old one out you could copy it. I have done that with trailer harness, it is not to bad of a job.

Here is one from Erik's, he show it out of stock right now but he should be getting some in. http://www.eriksmilitarysurplus.com/frwihaform3t.html

Very Nice job!!!

Nice!!!

It is always hard to sell one of your trucks.

Welcome to AZ, My bother -inlaw lives in Prescott and he loves it.

On some doors I had to heat up the hing and bend it the way you need, does not take much. Also I removed it from the truck to heat it up.

Sounds like the over speed light to me also.