Search results

His pump is like my pump on my M936, it does not have a screen on the top. Now my M923A1 has one but mot the M936. It is due to the auto up on the wreckers not having the same type of pumps.

The bleed screw on the 8.3 is on the back side of the pump. It takes a 10mm wrench. Just stand on the tire on look over on the back side of the injection pump and you will see it.

I have one that has the Hog rings on it.

:ditto:

If you lift the radiator up about two inches it will make it a lot easier to put the hose on.

Yes, Check these threads out. http://www.steelsoldiers.com/showthread.php?121547-M936-Wrecker-Hydraulic-Hoist-Motor&highlight=winch http://www.steelsoldiers.com/showthread.php?117057-FYI-for-Wrecker-Owners&highlight=winch...

That is ture, On a new truck I check it cold then drive it a little and check it again.

Also needs to be up to temp. to check.

If the spring brake override releases the brakes I would check the roller valve on the parking brake. Also make sure the front service glad hand has a vent on it and it is clear. When you release the brakes a little air vents out the glad hand.

I made a little tool to help press it in and I got it in.

Anyone have a good trick on installing a new Spindle Bushing in a M925? I have removed the old one and need to install the new one without damaging it.

There we go, I forgot to look at Rapco's paint. Thanks!!!!

I was going to do that, but I was thinking that someone had the code already. Thanks

Anyone have a Behr paint color code for the light green inside of a S280 Shelter?

Email sent with pics

Here is the p/n and a link to Erik's that has them. nsn 5330-01-299-6616 p/n12356775 http://www.eriksmilitarysurplus.com/fucapresefor.html

Nice job on the roof!!!!

Welcome!!!

aua :cookoo:

I saw GL-1 and 10w oil at a C.A.L. Ranch store.