Search results

86humv Did you say that you have a tach that would work? If so how much would you want for one? Ken

86humv Hi again. Did you mean the sending unit? Ken

86humv Sorry I'm confused. Are you saying That the 3k tach works with my sender? Ken

86humv 5-d1-03500-rpm-24-BA-0-0. Ken

86humv I agree. The tach is new and this is the third sender. I wish I could test the tach. Also I wish I knew if I should read some sort of output from the sender. Ken

86humv Hi, This is how I have it wired. Ken

86humv Hi, I installed another sender and still no luck. The tach that I have is the 0-3500rpm model with a 4 wire terminal strip. The sender P/N is 6680-01-148-8875. I'm not sure if this is the right sender. They said it was for the Humvee. When I turn the ignition switch to the "Run" position...

Action Who has the molle covers for the high back? Thanks Ken

Hi Is there a molle cover that works on the low back drivers seat and the high back passengers seat? My Humvee is a 91. Thanks Ken

It's supposed to be a new one. I wish there was a way to tell if it was bad. Ken

Hi It should be a simple hookup. I have voltage at the red wire and the black has a good ground. The center two wires are from the sender still no reading from the tach. I hooked the sender up to a drill and could not read any type of output. At this point I am lost. Ken

HiThe Tach I have is the one with the 4 screw terminal strip. As to the sgi-5 I don't understand how that would work, please let me know.Thanks Ken

I have installed a Tach. and like many have had no luck getting it to work. I installed it per instructions on this sight and feel everything is wired right and with continuity at all points. I bought a new sender and still no luck. Has anyone ever determined what output should come from the...

Thanks all for the inputs. It helped a lot. Ken

Hi Could someone explain what (High L ) position does? Thanks Ken

Hi When checking the voltage at the tach that you get from the fuel gauge should it be 24 volts? Ken

Hi The tach that I have is the one with the terminal stip. I used spade terminals with 18 gauge wire. I attached the power lead to the fuel gauge power wire and the ground to the ground screw on the instrument panel. The two wires to the sender, I stripped the insulation off of the wire and...

Tach still dosn't work Hi So I got a tach and It didn't work. On a previous post we thought it could be the sender so I got a new one and that didn't help. Just like before when I turn the switch to run the tach needle jumps to about one grand and then back to zero. It's like I'm not getting a...

Hi Well I got a new sender and it still will not work. When I turn on the ignition switch the pointer pounces up and then back to zero. My thinking is that I am getting power to the tach but for some reason the signal is not getting to the tach or whatever. I have hooked up a meter to the sender...

Juanprado I read 86humv's post's on this and it sounds like that is my problem also. I will check to make sure everything is wired right and that I am getting power and a good ground before I order a new sender. Thanks all for the inputs. Ken