• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m38inmaine

    Operation "URGENT RESTORATION"

    Check that dipstick..
  2. m38inmaine

    Operation "URGENT RESTORATION"

    Received the correct screws from Fastenal so I started installing the front fender splash guards. The screw is a 1/4"-14 tapping pan head with a type "B" point.
  3. m38inmaine

    Another Aussie goat rescued

    The hose has a 90 degree swivel on the end that directly screws into the top of the hub. I think it is a 1/4" pipe thread.
  4. m38inmaine

    Another Aussie goat rescued

    Thanks for stepping in Mark, looks like there will be two packages headed down under from "Mark".
  5. m38inmaine

    saving military communications gear at hamfests

    Any contact info on the MSR-8000?, I have one of those Sunair radio's they are a nice rig.
  6. m38inmaine

    Another Aussie goat rescued

    OK, well PM me your address so I can ship the bearing seals.
  7. m38inmaine

    Another Aussie goat rescued

    I don't have any extra lift rings, how about the other owners on here ?
  8. m38inmaine

    Working on the M1078 LMTV

    Sort of like sandblasting sand in the Goat..
  9. m38inmaine

    Another Aussie goat rescued

    Do you need the ring on the side of the body or one of the top corners ?
  10. m38inmaine

    Another Aussie goat rescued

    I have these 3 seals taken out, the large one is what I call the wiper seal, and the inner and outer bearing seal. The inner seal has a few spots where I had to use a punch to get it off as it's driven on the end of the spindle. I'm sure you can flatten it back out. The rubber is all soft and...
  11. m38inmaine

    My New Gama Goat Project

    http://www.steelsoldiers.com/showthread.php?141472-Operation-quot-URGENT-RESTORATION-quot
  12. m38inmaine

    Another Aussie goat rescued

    Do you still need the bearing seals? I would be willing to pull one set from a hub I have.
  13. m38inmaine

    Correct Decon bottle location on M109a3

    PS magazine...
  14. m38inmaine

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    Alan I believe these are the parts you are looking for, I could only find 4 of them. Nice talking with you on the phone, working on shipping those tires. Mark
  15. m38inmaine

    I have joined the Goat herd

    Tom, I measured 11 3/8 from center of governor pin to center of rack pin, picture is how I measured it. It was my experience that I could not remove or install the rod with the head bolt nearest the governor in place, not enough clearance. Mark in TX may still have his if it did not get...
  16. m38inmaine

    Salt Lake City UT to Back East

    Looking for help getting 6 Gama Goat tires from SLC Utah to Back East, destination is Maine. I would be happy just to get them to MA area. They are 40"x12" and weigh about 85lbs each. SS express or if you are a shipper I would be interested and I am not in a hurry, if it takes a month or two...
  17. m38inmaine

    MV of the Month Nominations, August 2016

    My 1971 M792 Gama Goat
  18. m38inmaine

    Operation "URGENT RESTORATION"

    Thanks Tom, it wasn't as bad as I thought to get it installed and it made a world of difference as I can open and close it by myself easily. I had to take off 2 weeks of work to get it done enough to take to the rally. Just not enough time in the day to get it done. When you get a chance post...
  19. m38inmaine

    Operation "URGENT RESTORATION"

    Thanks, your part is packaged in a flat rate medium box and will go out tomorrow. Another item I forgot to install was the engine cover torque rod, installed that after work today.
  20. m38inmaine

    Operation "URGENT RESTORATION"

    Each fender uses 5, thanks.
114,045members
167,049threads
2,351,811posts
4,893online users
Top