Search results

Thank You The flexible break lines look good no cracking that I see so far. Will look again in length. Was gonna use the silicone there to clean surface and leave a protective layer ( hopefully) / The bushings on shocks have some cracking not real bad but has some. Wanted to put a thin...

Got silicone spray. Gonna put some on rag and go over surface of rubber grommets and surface of flexible brake lines. I will wipe off after to leave No build up of silicone : just to clean surface with it Will that work ?

Can’t find the Manual that shows My 83 M35A2 But close enough to where I can hopefully get it. Newer M35s show multiple grease fittings on front wheels - Mine has one facing up on top. Able to get full size grease gun on them

I Put grease in the front wheels to feed the boots. I put in 10 good pumps on each. The boot that has not been changed to the zipper boot feels like it can take more grease. The zipper boot seemed to give resistance after 10 pumps. I feel that one is full. Gonna add more to other boot. If I...

Lucas oil Grease

I got Lucas oil Heavy Duty Grease today. It actually reminds me of the GAA golden looking I used on these Vehicles a Long time ago. But the Lucas Oil grease is green.

If I ever state something that I’m gonna do that’s NOT Kosher in Your Minds :: Please Let Me Know - Thank You

Current status is : the 00 gear lube came. I will be changing the steering 80-90 weight to the 00 Also be greasing the fittings. Have to look at manual : looks like grease fitting or brake fluid bleeder inside the wheels facing up. Front wheels. Sorta think I maybe it’s a grease fitting to...

Bleeder valve on air assist pod on front / back end had square plug to take off and put in air compressor oil ( one of the videos suggested that to do). Will be looking in manual for Complete system parts. Have checked under a bit didn’t see any damage to brake line. But need to go thru it...

I haven’t gotten the bleeder yet. I have always either been in pumping the brake pedal or down under at the bleeder valves. I read and heard I can Gravity Bleed it. Plus You saying just pump brake then go and crack bleeder. Didn’t know you can do it by yourself. Another Good thing to know...

Also getting OD paint. They call it Forest Green Camouflage. Can to brush on underneath and probably a couple spray cans. Trying to offset some of the rust on her. Hood hinges rusted. Brakes #1. Thank You

Great. But I gotta jack her up to change wheel cylinder seals. Wish I didn’t have to jack her up. Getting a 20 ton bottle jack and truck safely stands. Metal plate. Hoping to have a Real Good Truck Mechanic be the lead on this one. I hope to help him. He’s busy so gonna be a bit. I will be...

25 gallon tank

Would this bleeder do. I have a decent compressor/ old style. Motor / belt / sorta big tank Had 4 tree trunks cut to size to fit under front bumper. Had them cut to 2 different lengths. Will still have safety stand under axel and will use Bottle jack / and try and get some metal plate 3/4...

Great posts on the why Dot 5. When I get to fill up stage probably gonna put in 5 after reading a bit. Thanks

Question :: after the fix and adding fluid I will stay away from Dot 3. Will Dot 4 be OK or go to Dot 5? Thanks

I have done car and pickup drum and disk brakes. Nothing of this size. I will be looking into the leak at the Master. And the front wheel where the leak is has got to be worked on. Probably in time all the wheel seals need changing. Truck 42 yrs old. The drivers front side where the new zipper...

I will be getting Dot 5 and a bleeder The Dot that I added was Dot 4 ( My Bad) Thank You for Your Help and Direction 👍🏼🛻

I have 00 gear lube coming / I plan to replace steering 80-90w with it to help the leak at the pitman arm Thanks

You are So Correct. Got to get Brakes Up To Snuff before I drive Her. Will be looking into it. Thanks 👍🏼🛻