Search results

Both are correct. The rebuild was what I was figuring on even though the replacement only had 31k reported miles on it. I thought I'd double check with y'all before I tore into them. Thanks!!

Boy, they turned our GREAT!! Looks like y'all had fun!

:ditto: What Barrman said! Before the computer driven vehicles, brake lights over-rode the Hazards( at least in all the vehicles I drove).

Would that be the one on the left or right?? :p With the fast idle on, it pretty much takes care of itself. It's the "something new" that always gets my attention. Thought it might be a loose belt so I've tightened them up, but still going on. Thanks for the input!

Does anyone else's Gen2 light flicker on after start-up, right after the glow plugs recycle? This started a couple of months ago. Gen2 light comes on with the key, off at start-up. Voltmeter drops as glow plugs start recycle and rises as they end recycle. That is when the Gen2 light comes on...

After I put a replacement 6.2 in my M1009, it blew white smoke at start up. My problem was that the injector pump was out of time(retarded). After placing the IP back on the timing mark it all disappeared. Some do like the timing "a match book cover" to the driver's side of the line. Good luck!

:ditto: The reliability of these vehicles is dependant on your ability to work on them. Read through as many of the threads on the CUCV's as you can, as they have quite a few repeat pecularities, most of which are easy fixes. Good luck on your vehicle search.

Did you use the OD green? I've used the "sand" on the exterior of my M416(I'll have to post pics soon) and was really interested in using the Durabak OD on the interior of my M1009.

:ditto: They worked great on my M1009, I used the black ones.

A second "Howdy" from the Lone Star State!! Your M151a2 + M416 is an awsome looking combo!!

When you start cleaning with the Xylene, make sure you use gloves and ventilate the area VERY WELL. NO OPEN FLAMES OF ANY SORT!!

OH MAN!! My boy's soccer team qualified for district, which happens to be in Brenham on the same day. Momma and my girl already have two parades on the 3rd here in Port Arthur and Groves. Looks like we'll have to look foward to next year. Good Luck!

Could the fusible link from the plug to the firewall be blown?? edit: by firewall, I mean the 12v terminal block on the firewall.

:ditto::ditto:!!!!!

Congrats and post some pics as soon as you can!!!!!!

My wife says " if you're watching this thread, you might be on SS too much" !!!

nopics Someone had to do it!!!!!!!

Jimmy Hoffa????

If you still have the 24V to 12V resistor connected (it's behind the air cleaner, on the firewall), as one fails, the others will slowly fail. There's is a huge sticky on the GP theory of operation within the CUCV forum of this site. It's great reading!!

Sorry, I don't have any pics handy. I found some somewhere on this site, just can't remember where. After removing the rack from the back seat of my m1009, I used the left over cable as a BIG power cable. The resistor is the only thing I removed and it doesn't need to be removed, just...