Search results

These are 2 inch pipe 10 feet long .

I did change the ends . It's been almost ten years .

I had bought Aeroquip ends and hose when replacing the coolant lines on my truck .

Yes it and 3 more ldt engines I bought at a yard sale need to go .

The LSD is still here . I don't have any plans for it there are not a lot of people interested in military trucks in this area .

I drove m52a2 with the Mack 673 engine around the yard today . I thought I might have problems with the clutch and power steering .The bell housing disk and throw out bearing are military and the pressure plate and fly wheel are civilian . The power steering pump is from the LDS engine and it...

Taking it a part I heated up the nut and used a hammer and punch .

I bought a 2 inch wrench used a grinder to open it to 2 1/4 . then when I could not get it any tighter I used a punch and a hammer to snug it to the next hole for the cotter pin . it is something I watch it has not loosened up .

For my 5 ton I have Progressive commercial . $ 83.00 a month

The intake ports should have metal rings between the head and manifold if not in a short time they will suck in air .

You might try researching the cable on line and see what you find . you may have a good find .

I looked in one of my manuals to get these weights . You may have to strip it down to find out ? M 211 with winch 13,580 m221 with winch 12,105 ( Tractor model)

Good pictures .The military mack bell housing is the same way I had to use silicone to seal between the block and bell housing .

A few years ago I towed ( Area 52 ) M54A2 with my M52a2 through town to his house .It was not bad I had one sharp turn leaving the county road I though the m54a2 would push my tractor to the side but it did not I skidded the m54a2 front end over it pulled right along after the turn .

Memphis Equipment has the best shipping when I order on Monday there parts are here on Thursday .

I use these on my 5 ton I haul water with I have to back down to the water and place the chocks behind the trailer tires when loaded I drive up till a level spot an walk back to get the chocks . I have used the rubber chocks they seam to mash down from a loaded truck or trailer some times they...

With the hood closed the air cleaner moved over .

I removed the oil pan and formed it to miss the front end and took a picture of the front motor mount . also put the right fender on and made the exhaust pipe and hooked up the power steering reservoir I would have liked to use the one that came with the truck there was not a good place to...

I have bought channel felt for my m211 and 5 ton from (Steel rubber .com ) you just have to match up what you have to what they have . they will have every thing you need.

I started my Mack 673 E engine today for the first time. It sounded good fired up and idled smooth .I still have lot"s to do but it's nice to see your work worth while .