Search results

So I was driving home yesterday and it was just like any other day except my temperature gauge never moved. My heater was still blowing hot so I figured I had cut the line or something. The drive is only about 5 miles When I got home I checked and my coolant was down about 6 inches (in the...

I have one 500w freeze plug heater and i can start the m1009 every morning down to 0 degrees with no glow plugs.

I have a high speed idle and the whole arm that attaches to the pump. I'll see if I can find it, if I can ill sell it for 50 shipped.

It still could be a fuel delivery problem though, start cheap and work your way from there.

I'll sell you mine (no bolts or gasket) for 15 shipped.

I have one, it does not have the bolt or a gasket, but I will sell to you.

if you are grounding the blue wire it will only take a few amps.

There is a company that makes a pintle hitch and ball combo. The ball sits on the lower portion but you can move the hook down for a pintle set up as well. Link below http://www.tlcentral.com/store/pc/viewPrd.asp?idproduct=894&idcategory=0

you can just use a ratchet, either way I am confident you will be able to get it out if you dont use an extension.

Dont use an extension, if you just squeeze a ratchet in there you will be able to get a better grip on it. I had same problem and that was my solution.

I have a four inch straight pipe that exits right infront of the rear passenger tire with a 5 inch tip.

Is your idle high enough. I have run alot of pto winches and if your idle is not high enough it will kill the engine.

Racor makes some great spin on filter systems. They are pretty expensive though. I have a racor #445R and love it, it has a primer button that makes bleeding the whole system really easy.

pm me if you have any other questions.

The gm 8 is the best and most effieceint turbo. You will need to buy or make a turbo master.

The 4 inch exhaust I built. I have a piece of flex pipe that comes from the turbo. I will add installed pictures soon.

You dont need short injectors for turbo, just use two manifold gaskets. That is a lot less trouble than bending those delicate lines.

I bought ones like that (it looks like the same add) and the were wellman 070's

Do you know which relay it is?

Once it starts it keeps going until I turn the vehicle off.