• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. bubba_got_you

    Flywheel flexplate help

    yes definitely not the same and not interchangeable
  2. bubba_got_you

    M1009 oh boy

    Pull the hub (how to do that has been covered here lots of times) pull the bearings clean them out pack new grease in them (lots of it) put grease on the spindle and all surfaces, replace seals and reinstall hub. [thumbzup]
  3. bubba_got_you

    Horn problem

    sounds like a SHORT to me.
  4. bubba_got_you

    Rebuilt injector pumps - maybe

    The situation has been handled and needs no more discussion. Some of these comments are borderline slander and that is wrong and this is not the place for it. Weather you agree with him or not there is no call for slander or name-calling. The situation was handled responsibly already by other...
  5. bubba_got_you

    Does my flywheel look ok?

    well.....if it ant broke....don't fix it. but you are half way there
  6. bubba_got_you

    Got One! Questions now

    then you dont have a turbo and 4" pipe lol
  7. bubba_got_you

    Got One! Questions now

    nopicsnopics
  8. bubba_got_you

    XM818 of Death has died

    No I understand that’s why I changed my mind and said that he should just pull it to make shore. But we where talking about how the rad at the top was hot and bottom was cool and how Flyingvan911 thought it was a clogged rad causing the problem not a bad pump. My point was that it would not be...
  9. bubba_got_you

    XM818 of Death has died

    maby but with the size of the 5ton rad you'd have to get a cat stuck in there to clog it. lol it would be more likely to be a clogged lower hose on the rad.
  10. bubba_got_you

    XM818 of Death has died

    but if the pump is bad it would not be flowing when hot.
  11. bubba_got_you

    XM818 of Death has died

    I didn’t know they where plastic! Best just to pull it and take a look then
  12. bubba_got_you

    truck went into lake

    I would go with a 6.2 with 6.5 turbo 6.2 block is stronger. Unless the 6.5 block is an amg block.
  13. bubba_got_you

    truck went into lake

    Thank you for your serves but if you want us to be able to help you, you have to help us and try and use spell check or proof read before you post. 1st it makes you look stupid and 2nd it is hard to understand.
  14. bubba_got_you

    XM818 of Death has died

    To check the pump i would just unhook the upper rad hose and put a water hose in the rad and start it up and see if it pumps the water threw. then you will know foreshore.
  15. bubba_got_you

    XM818 of Death has died

    If the pump were bad why would it get up to 190 then open and cool if the water is not flowing? I know it would be under presser in the block and force some cool water in but it would have to force a lot of water in to be noticeable. Because I live in Florida any trucks I keep I take the...
  16. bubba_got_you

    817 going to the scrap yard

    if i had the cash i would have already been there to pick it up
  17. bubba_got_you

    817 going to the scrap yard

    FL stands for Florida
  18. bubba_got_you

    817 going to the scrap yard

    odd ball has been around for a long time under a different name and had WAY more than 100 posts.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks