Search results

last year I bought a Herules XHD motor that will go in my 1943 White 666 .the motor was rebuilt in 1963 in France and never put back in a truck .the seral number in the truck I have is about a thousand numbers diffrent from the motor from France . so maybe this motor was used in the invasion or...

I can help or dismount these things and chain the wheels to the frame and get it ready to ship on one of my week ends off . with the truck down to normal size have you had any luck finding a hualerthat could load it where it is ?

i would hate to try and drive your truck to Albuqurque a brake down would leave every thing in a bad spot . my m52a2 with trailer runs about 45mph and with a load it would be as fast as this truck runs . I could get your truck to Farmington and feel I'm not pushing my luck . kenny

Great save . I'm about 100 miles from Dulce and can help getting your truck ready to ship . I know these trucks are wide but I don't know how wide . I have a compresser and tools and a m269 wrecker low boy with beaver tail with ramps if needed .kenny

I used rubber cement after cleaning off the old grease and it made it a little tacky . kenny

If some one buys this truck and needs to store it in aztec . I could help get it there if it is on a weekend I'm off it should fit on my m269 behind the m52a2 if it is not driven or has trouble on the road I could be there to help. kenny

my GMC gets 4 1/2 to 5 mpg at 45 mph .

the m135 rims are made to only go on the hub one way if turned around the lug nut hole is not taperd where the lug nut touches the wheel .I used 10x20 on my 211 and I thought the tire was kind of close to the spring seat but never a problem . 1100x20 will be closer

some hose on the exhaust that runs along the top of the windsheld frame and then under the canvas top to the out side will make keep the noise down .

very nice job. does any one have a part number for a replacement bulb and know where to get them ? thanks kenny

RE: Airpack I use atf to lube my booster . maybe somthing heaver was put in be for you owned the truck

GM 7411327 ratio 1.16to 1 ( single speed ) the shift rail that is hooked up when it is pulled out it is for reverse when it is pushed in it is for driving forward should have a inturnal spring putting presure to pull it in to the case. the shift rail not hooked up is for in gear or neutral ...

I have had some luck using moth balls in closed areas that the bees seam to like to biuld nests . kenny

checking the part numbers these shoes don't fit m211 truck - m52a2 truck- m200a1 trailer or m269 trailer the numbers should show up and fit some thing ?

Eric the 3 I have are left (lhfe14751) and weight just over 3pounds each . I found a forth one but it is not turning and I started soaking it so I may have 4 all together thanks kenny

I have 3 of them that are easy to turn but they are all the same so I don,t know the left from the right . kenny

I had the same thing happen I was able to free them up by soaking them in kroil for a few days and I was able to get them working . I will see if I have some on my parts truck that are good and let you know kenny

Ron I have a bed off of my 1953 m211 with all the bolts and wood that lays on the frame and the springs that go on the bolts the tail gate could use some work but it opens and closes . the manual I have I bought from Memphis equipment (901-774-0600) for about $50 and it covers so much about the...

nice picture it looks like the canvas top is on and there is a brace from the sides of the wind sheld frame to the side covers behind the hood I have not seen these before ? the truck I have was made just after the war and the windshild is fine with out any other support . any thoughts on this ?

yes I think so . this one has a full cab. the pictures I have seen show some trucks with soft tops . I paid the owner for the truck and when he has the truck to the road I will go get it . the truck came with 10.22 tires I was going to take 11.20 with me but the brake drums may be to big for...