Search results

60 days today for me event 5147

its not a big deal even if it is welded on to replace the pintell just grind off the welds and replace it.... i used grade 5 bolts so that is why i welded

nope it wont be a tad too short for my set up and i have no plans for a m105a2 or anything that higher. so i am good with the hight on my truck.

why F**k around and not pull out the new lincon 180 mig and make sure it will never come apart!!! I am going to use it on a m101a2 if my EUC ever clears>>>

http://www.imagetex.com/albums/userpics/10086/normal_DSCF0032.JPG http://www.imagetex.com/albums/userpics/10086/normal_DSCF0033.JPG

what was the lot number and when did it close?? was it your first EUC....

Anyone have a first EUC clear from 5147 yet?

Just stop in at the yard with the jeep MB on the roof of the trailer.. jack or his son will show you what he has at that yard or take you over to the other yards to look for what you need

I worked on them in my Air Force days a AK round isnt going to take it down you better bring a missle!!

they say 24v bulbs are just dimmer..... i am going to change he bulbs out to 12v ones when i pick up the trailer.......

Standard Military vehicle wiring information (letters are marked next to connector contacts) A, C, H - blackout tail lights and blackout clearance lights (all three pins are electrically connected together within vehicle's wiring harness) B - brake light and left turn signal light D -...

Lot closed 4/29/10 lot awarded 4/30/10 EUC sent to GL 4/30/10 revision needed 5/3/10 EUC sent to BC 5/4/10

Waiting for my first EUC to clear so i hope this becomes mine!!!!!!!

Thanks but just flew up today took my photos and flew back!!!

http://www.steelsoldiers.com/trailers/51831-m101a2-plug-adaptor.html is this wat you are looking for??? you can buy the connector from erik's DO NOT DE PIN THE CONNECTOR!!

m105a2 is rated for the town car....

Does this fly? if so make sure to do a weight and ballance. all fluids full (serviced), zero fuel, depuddle the fuel tank. and then weigh the aircraft after paint...

Trailer Receptacle, Flange Mount, 12 Socket, MS75021-2

with one coil in the cord will make the electrons move faster and make the tail lights brighter!!! Try it!!!

Since i have to wait like 60 days for my EUC i figured i would build an adaptor so i could just plug and play when i pick up my trailer... all i should need to do now is change the bulbs..... i bought the MS connector at EriK's Trailer Receptacle, Flange Mount, 12 Socket, MS75021-2...