Search results

I found a source for the gaskets 147-0043 for $3.50 a piece if anyone is interested.

That is what I’m looking for

I have a powerplant trailer with two 003a’s. All parts seem to be there except for the internals in the switch box. I cannot find any info for the box or any for sale. Any help would be appreciated

Ok great thanks Ray. I disassembled 8 nasty/stubborn/plugged 003 injectors and cleaned them. They are all set to about 1800 psi and spraying a mist. I also just popped out the two fan side injectors on my first 003. It ran fine once warmed up but smoked white on startup for a minute or two...

I need around 20 of the 147-0043 gaskets. The most reasonable price I have found is $4 per at equipment parts sales in PA. Are there any other sources out there?

Well I have great news...my last 003 that was stuck from rust in the cylinder is free.. I took out the injectors and sprayed in knocker loose. Had a 2 week soak. I just popped off the heads this afternoon and filled the cylinders with atf . Then put a 3" hole saw upside down on top of the piston...

That will work. Not sure how I missed that on Amazon Thankyou

On one of my 003 I replaced Ac meters with digital. On another my dc (small gauge) needs replacing

My ammeter on control box is foggy to the point it can’t be read. Is there digital replacement? I am only finding 12vdc that will fit in the spot

Sea foam is available in one gallon cans in Wisconsin

That is actually what I was looking at.

I understand. I’m in no hurry. I’m getting my ducks in a row. I have injectors soaking in seafoam until I get back in a week. It will be no fun watching everyone snowmobiling while I hang out with these healing ribs still:cry::mad::(

Ok great. I see the vevor brand on Amazon cheap enough and good reviews

Maybe I could borrow yours? LOL. What tester do you have?

I would think adapting to these injectors would be an issue?

I would like to clean and pop test my injectors on these 002/003 generators. I have quite a few and sending them out may get expensive. What pop tester would work?

Ok great Thankyou Ray70

Update: I have my 2-002’s and 1-003 running great. I welded new bottoms on the tanks and am going to paint all 3. I installed digital gauges from an old member JimC since my CT was bad. Had to also replace the VR, that I purchased from @kloppk. Now on to the last 2 003’s that were seized. I...

figure I would give another option if you didn’t like the last two