Search results

parking brake switch

Congrats on getting the crane working!

Boyce Equipment in Ogden UT should be able to fix you up if Suprman is unable.

Correct it is a single channel so 60/70/90 psi in ALL wheels depending on which system they have.

Hello and welcome from the Salt Lake valley of Utah

If they haven't gotten the Updated ECU which puts tire pressure at 70psi for non-wreckers and 90psi for wreckers See http://psmag.radionerds.com/images/7/70/PS_Magazine_Issue_726_May_2013.pdf for the whole monthly magazine and attached is a screenshot of the pages taking about the updated...

Yep I now have two for each of my trucks Gunzy, so we are in good shape going forward :-) Thanks again 98G for the chains and other goodies :-)

Hello and welcome from Utah

Also if you continue to lose prime double check your fuel Pickup Tube as they are notorious for cracking their solder joint at the bung.

There is some currently on the big E site using the part number in post #48

Went over to my storage location and started and ran both trucks for a half hour and slaved off my 804a generator as the batteries were flat. Pulled them and brought them home and they are on the chargers now in the garage.

Hello and welcome from Utah

I agree on the chains and is why I bought those that I did for my trucks!

For Utah Hill AFB you must trailer or tow vehicles. If at the Utah NG Armory or at the Ogden DRMO storage lot you are allowed to drive off.

Correct

But it's just enough of a charger to keep charged batteries charged.

Contact Member 98G here on SS as he does recoveries and is located in Tucson.

Yep. what Elkhtr said about the "controller(s)" might be the killer of re-using the panels if they are missing.

Congrats! Figured it wouldn't be long till you had one!

Hello and welcome from Utah