Search results

maybe the problem is the unit under the truck, you can get a new one on ebay for $90

I took my truck to maaco in Reading, $1500. You just need to make sure there paint booth is big enough. I bought the paint from Army Jeep Parts Inc. Home page.

I use B&B 267-718-3704

what is the make ross or sheppard, does it work and how much do you want for it

Hi Guys, Need a source for power steering box, mine is shot the worm gear is damaged. They have one a Eastern surplus for $700 but if you want them to stand behind it, it costs $1200. Thats for a working take off, if working why the higher price to stand behind what you sell? Does anybody know...

That thing looks cool, I saw it on ebay. You should have sealed the floor in the back( I can see daylight from pics of under truck). How are you suppossed to get the spare tire down, it must take 3 guys . You also should have fold down seats in back If you were going to build another I would do...

I used a grinder with sanding disc, there was some small bubbles, I used a needle scaler and that opened the hole under the bubble (thats a nice tool good for getting of peeling paint). Then you can weld in new metal and seal roof with bedliner stuff. You will need about 2 gallons($90 a gallon)

check your roof on the box, you will probably have to reseal it. just got done doing mine

Russell, Did you pick yours up yet? I got mine on wednesday, I drove it home no problems Looks like the roof is starting to peel in a couple spots. I will have to seal it

I will take six if you have them

hello, Here is some pics of how I did all my tires, You have to remove ctis and weight, then put 20oz of antifreeze in tire to balance it. I have lots schrader valves if needed (pm me) You will also have to go to homedepot and get an adaptor from 7/16 to the elbow on tire use ms paint to open...

AMX, Undo hose on rear tires to ctis valve, then install a shedder valve ( will let you put air directly in the tire, then you will know if the orings are leaking I can send pics if needed

mine seems to be fine, you have to remove the ctis and the weight, I can only do about 52 mph tops, I don't use extra lug nuts

not at this time, I have another truck and i might need some of them

Hello, My wheels wobbled, I removed ctis and weight, then added 17 oz of antifreeze to each tire now its smooth going down the road

I bought a set from Tractor supply $30, work on 12 and 24 volt, i'm going to wire up the four pin to a tail so I can use on my pick-up or m35a3. Does any have a extra 24volt trailer harness tail / plug ?

Hello, I was wandering how you can get the service info for your duece, is there a web site that you can enter your serail number, or do you have to write a letter to someone?

Hello, I have two one is bobbed and the other will someday be a quad cab

picture #2, that is a bracket that holds air line on my m35a3

m35-tom thanks for the info, I think that I will wait I have been spending to much