Search results

Sounds like you have either one or two bad Air Pressure Switches. They will need to be replaced. When both switches are in the closed position @ 60 psi are in series and go to ground to turn off the light and buzzer. If you jump out both switches the light should go out. NSN 5930011890494...

Hi, It sounds like your " Low Air Warning Switch " is not working the way it should. There are two air pressure electric switches wired in series. There is one on the primary and one on the secondary air tanks. The primary and secondary air tanks are located under the passenger side door. If...

I have a " Signs by Tomorrow " in the next town over.......Can I get hooked up with a banner like the one you have on your deuce........?? Thank You, C'dub

I started off with a Military Vehicle and one thing led to another. Before I knew it, I was talked into getting a military radio. I've always liked radios and found them to be very enjoyable. Having a MV I like sticking to the military radios but not so much into the ham side of the hobby. Many...

Hi Brad, I think the only parts that need to be added to the davit to fit into the ISO bed are these three parts, two of which are the same. seya, C'dub

I have been helping the " Toys for Tots " for the past two years at their annual football game. I collect all the toys in the back of my USMC five ton cargo. The unit I help out with is the Marine Corps League Detachment 434 " GOONEY BIRD " out of New Milford, New Jersey. The very Best, C'dub

Hi Brad, I've sent 36 pic of the davit, tire carrier, troop seats, seat hold down pins and the siide pannel chains as well as the rear pannel side brace, back rest, up rights and bow corners to your email. The long seats measure 74 " and the short seats measure 64 " This should keep you...

OUTSTANDING.........................!!!!!! C'dub

Oh snap......I almost forgot about the BIG MOTHER lower section......Wait....there could be more mods then I think..... I'll take more pic of it tomorrow to show how it goes together. C'dub

I think the only mod was done to the height to make it shorter. This way it will clear the cargo cover. There are three brackets that make this possible. The hook bracket stays on the upper sectiion. There two pin brackets, one bolts to the bed for storage and the other bolts to the lower...

Hi Brad, Sure, not a problem...........need any more pic of the davit.......?? Cheers, C'dub

Here are some more pic of the ISO bed and Davit from Schotts in Maine.... Cheers, C'dub

Just to add what Rory says...... We'll all help out adding as much information as we can think of. Some points of interests are: -- All four bed sides are the same and are interchangeable from the front to the back or left to right . -- There are four troop seats which are held in by...

Does someone need bed pic or measurements.........Good luck finding the troop seats and the sides.....that could be a tough one....... If there is anything I can do for ya, just let me know.... Cheers, C'dub

Thanks Mark, I already have placed an order with him for the CX-13300 cable. Yes, he's a good fella to deal with that I would deal with again...:-D Cheers, C'dub

Thanks for the suggestion.......:-D......I have already been in contact with Austin.....:-D Cheers, C'dub

Great surprise for sure.......always nice to find some extra goodie that you would not expect to find.......OUTSTANDING.........!!! seya, C'dub

The USMC Corp. ISO five ton cargo beds come standard with the " nuclear tiedowns " eight to be exact. The Tie Down Kit shown here is a MWO kit NSN 2540-00-782-1467. I had picked up this set off ebay a year ago so I could replace my old rusty " D " rings with NOS ones. The pots I will have to...

Here's a pic of where they go through in the manual pic and where they are docked in the housing. There are also line up markes on the sides as well. seya, C'dub

I'm so anal about the little details. I always use black ties......LOL.....Haha... btw.....if the fan clutch goes bad. There are two docked bolts that you can use to lock the clutch in place. This way the fan will still turn. If the fan clutch goes bad the fan will not turn. Cheers, C'dub