Search results

I've used SEM, I've had color pre mixed for a specific code and I've used spray bombs from auto parts store for interior.

I've had good luck painting them , even changing colors. I wash them with soap and water and a stiff brush, dry well and then (using gloves) wipe down with lacquer thinner, really soak it and make sure to use a LINT FREE RAG, the plastic will get a bit sticky, at that time let thinner flash off...

Has that truck been parked on a slope with that side downhill? I'd bet that that's gear oil and it slipped past the seal while parked.

Don't you love it when they fix themselves?

Sure looks like the ones I used, made a noticeable difference in ride quality.

Sorry to say but you need the V belt pully pump, somehow you got the reverse flow serpentine belt pump.

Guess who's going to dig around in the garage and sell a few gas caps?

IIRC the empty weight of my truck weighed at the scrap dealer was 6550 with me in the seat and a half tank of fuel.

Before I'd jump on the fuel pump, I'd be looking really hard at the filter assembly. I doubt the leak is big enough to see fuel dripping but you may find a damp spot, do you have a way to pressurize the fuel tank? Just a few (5psi) will show you where the leak is. If you can pressurize it and...

Some of the above is dead on, it's cold outside. What happens to oil and grease when it get cold? It gets thicker, from the oil in the pan putting more drag on the oil pump to the ATF in the tranny and TC all the way to the differentials and wheel bearings. The cold also effects the tires and...

Move shifter from P to 1st, I think that will do it. How are your cab mounts? You shouldn't be having this problem.

I'm leaning on bad GP's, very little fuel comes out of the injectors. get the truck inside and warm, check those GP's and go from there.

In all these years and all the tranny's, I've removed, I have never come across any spacers that I remember. If I ever did I'd think some shade tree mechanic did a hack job.

Pulling something out of a stuck situation is totally different than towing down the road. My son (kids know it all and old men know nothing) didn't believe me that towing a 30' camper behind a square body Blazer was a horrible idea. I had no idea what I was talking about! Then he used the...

As a guy that has never had a new vehicle I've rarely seen that, and the ONLY time I have seen the oem U-joints with that plastic has been on CUCV's and they have been some of the oldest vehicles I've had, kinda odd.

I used duct tape, it worked but eventually turned to dust. Next time I'll try Scotch 88.

All that is available and probably cheaper than redoing both diff's. I'm not familiar with most tranny's mentioned but I do know about the 700R4 I swapped one in and left the 4.56 gears and easily cruised at 65-70 . The problems would start when I hit a hill, it doesn't take much of a hill or...

A lot of this gear ratio talk is lost on me, but knowing that the 6.2 is such a power house and torque monster why would you want any tranny that has a double over drive? A M1010 is heavy to start with, get it loaded for camping or whatever and it's not going to go very fast except downhill!

That's it, just the one seal.

Time to slow down a bit, I had a similar wake up call 2 years back. Went to dinner with my wife and woke up with EMS doing CPR, had a second episode a couple hours later in the hospital, bright and early next morning I got a pace maker installed. It changed my way of thinking and my outlook on...