Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Perhaps helpful...
Non-original replacement part for air brake tanks: Dixon HSTBC1000 (T-bolt clamp style, off A..zon)
Non-original replacement for wet tank: Dixon HSTBC850
Task notes: its a pain-in-the-butt. the straps/clamps cannot be slid between the battery tray and air tank tray. there...
This is a common & expensive CAT 3116/3126 engine failure point, which is easily prevented by proper fastening of the air compressor bracket.
Fix/PM: before selling (ie GP) or driving your LMTV / FMTV roll under the truck's oil pan, driver's side, and look at the air compressor bracket--...
The heater fan blower switch was working intermittently, so with winter coming...
Failure: Corrosion leading to poor connections and potential fire hazard...possibly due to build-up on switch of dry-rotted foam dust from sound-deadening material used in the heater compartment.
Replacement...
FWIW -- I finally discovered and solved my M1078's excessive steering play...perhaps this post will be useful to others.
Problem: Drag link tie rod end wear (NSN 2530-01-462-0755, pn 12877-KL, ZF Lemforder mfg).
Removal tool: pickup truck pitman arm tool (see pix)
I recently used my handy rubber-tired tree toppling tool to remove two sweet gum trees located between power lines and the neighbors shop...i used the winch just to keep tension until I v-cut the trunk, then placed truck in reverse to pull each tree over...successfully, without the normal sparks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.