Search results

When the guy told me he wanted $750 per tire , that was my reply . Before I paid that much four 14.5 tires I would buy for 395's . I don't know why I am hessitant to do it . The extra road speed should be good enough reason to make the change . Now all I need to do is find someone to give me $...

Good deal , And to think a guy in the classifieds told me he paid $ 700 each for some 14.5s he is selling . I have 3 new tires for my A3 need 3 more .

I just replaced the plastic line from the IP to filters on a truck I recovered last fri . It had a small crack from age I assume . It was not rubbing on anything . The second truck I recovered the same day had a leaking rubber hose that was a return line to the tank .

I have been told that is when seatbelts were updated

TiredIron , can you tell me how the diameter of the barrel would compare to the size of the diameter of the hole in your original M66 ring install kit . I was thinking the barrel mod might be smaller .

I think the best way to do it would be to put it thruogh a thinner recycler ( distiller ) . I think the end result would not be worth it since you would not get enough solvents to justify the process .

Thier is no reason the seller should not have a title or be able to get a title , unless he did something stupid like buy it witout a title . I would not buy it without a title unless you intend on parting it out .

I an interested in this topic . I have the ringmount , but no hole in either a softtop or hardtop . I also hate to cut up my hardttop it is too new to cut up . So I am forced to shoot in convertable mode .

He could of had a deadbeat bidder and had to relist the item . After loooking at the craigslist add I think you may be right . Why would the guy only post two pics when he usually post several pics .

My first EUC on two deuces cleared in 20 days . Pretty qiuck . My theory was they saw what this newbee paid for these two trucks ( I bid on the high side , wanted both trucks at the same time ) . Or I just got lucky . My second EUC a little over a week .

Bed looks kind of high to me also

I loosened the bolts in jamb , but not all the way out , wedged a few chisels between the clamp halfs , then once the leg was started I put a board on top of the leg and tapped it ( BEAT IT ) until it was the proper depth .

had my A3 down at a cabin by the river . Sandy driveway on a hill. I was very suprised how easy the rear tandems were spinning . I would geuss rear traction on a 6x6 or bobber is about 30% . It did not want to go anywere without the front axle locked . With the front axle locked I got no...

previewed two dueces a while back , both brake pedals went to the floor with absolutly no resistance at all .

I also got mine from the guys below . Best price I could find and fast shipping . Hope to get it installed this winter . Premium Supply - Home of Power Hoist

I like the way he claims they are sandblasted , he posts a gobs of pics and yet no pics of them being sandblasted . By the good high qaulity pics that he posted you can clearly see that old paint has been painted over . It also seems to me that the tires are painted the same flat black as the...

W 70.5" at widest point ( rear ) H 55" to top of windshield , not including hardtop or softtop .

same as whyme . My A2's and my A3 , the last week we have had 30 degree nights . The trucks start but will die . After a few trys they run , but pretty rough for the first minute . I am also going to go with something to heat the oil . I also do not plan on driving mine much in the winter...

In my watching the auctions I have been looking for the newest and lowest mile A3 I can find . I have noticed some of them are pretty rough . Mine is a 96 with 13,000 miles only issue was leaky heater hose and air to steering was turned off . I did have to remove the heater core just to get the...

Mine had a hose to the heater core leaking . It had chafed were it went though the firewall .