Search results

Tow4 - I'm guessing the aerial photos didn't load up???

Lots of vendors and vehicles at that event.

I have both. If you plan on cutting/modifying, I have some oddball sets.

I will bring some extras.

Doubtful. I would just bring plenty of beer, and you will probably find enough young bucks there to lift it up. :beer:

Also have M105 sideboards, tan cover. Deuce and 5 ton troop seats. Set of (10) 11.00-20 Goodyear radials mounted on 5 ton rims. More to come........

The frame "mating" would be the same with a 900 series. The 250 Cummins has no problem moving that MK-17 down the road.

Take some extra brake chamber pancakes with you; # 12 and #16. Available at NAPA.

And don't forget your hip boots.......if you follow stalker down the trails :D

:ditto:

All of the above !! :d:d:d

Brrrrrrr. Looks cold up there. Much happier using my boom while sunny and 78 degrees......

Pretty sure it's algae. Most truck parts stores have an additive. Then add some off-road diesel.

Got tan cargo cover sets, fiberglas uprights, metal corners, metal bows. Minor rust stain on inside, and some light exhaust spots on exterior - - $325.

My 2 cents.....that shear pin will bust LONG before you pull that frame apart.

CB21 - - cab or cargo/tan or green???

A/C: you might want to bring some multi-lube, just in case.

25 miles NE of Albany on Hwy 82.

Vinny, they are probably more than you want to spend. I had to haul these back from NC. All have good clasps, some have foam. Outside dimensions: Small ones are 32x20x12 w/rollers $75/each. Large ones are 36x29x22 - $85/each. pandctrans@gmail.com

Too long a list to type, but have LOTS of 5-ton and deuce parts. Deuce and 5-ton winches, 5-ton fenders. Used 1600 XZL's; locker for 5-ton diff; 5-ton spragues; 1961 5-ton wrecker (chassis stuff only); dash switches; storage boxes.