• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Engine knocking LDS-456

    A little water or spec of trash in your diesel can mess up a brand new injector.
  2. R

    Engine knocking LDS-456

    Put some Seafoam or Power Service in your diesel and see what happens. It might free up a bad injector.
  3. R

    Engine knocking LDS-456

    Any chance there is an exhaust leak?
  4. R

    Engine knocking LDS-456

    I would check valve adjustment next.
  5. R

    Engine knocking LDS-456

    I use 10 weight non detergent oil with the zddp additive for the initial 30 minute cam and lifter break in period at a steady moderate rpm. I then drain oil and change filter and put in John Deere break in oil and run it for 5000 miles or 100 hours depending on the application. This filter...
  6. R

    Simp's M915A1 Build Thread

    I like your plan. Hope there is room for it all to work!
  7. R

    Deuce starting problem and solution (in this case anyway)

    First time I have seen anything like these terminals and I will not be in the market for any! I would like to ad battery cables need high quality shrink wrap installed at every terminal to seal the connection between the cable and terminal.
  8. R

    What have you done to your CUCV today/lately - Part 2

    Looks like GM Camper Special mirrors. You can pull the mirrors inside the mounts and then rotate the mirror 180 degrees to make them narrower. They are then inside the extended mount arms.
  9. R

    Questions, issues with my CUCV

    CUCV's do not have in tank fuel pumps!!
  10. R

    Bought Another but What Is It? M1031/M1028A2/A3?

    The Dana 60 front axle has dually hubs installed as part of the conversion so that the dished dually rims can be installed. This way one spare works front and back. This makes the front wheels a little wider! This may be what you are seeing.
  11. R

    New member from NW Oklahoma

    Welcome from Western OK! Glad to gain another member in the state!
  12. R

    Simp's M923 Big Cam Repower

    Wes I feel your pain all the way to western OK! Poor truck you have worked so hard to fix right. I pray for your bad luck to end and things go your way again! Glad this didn't cause a bad wreck!
  13. R

    Help diagnosing failure to crank or stay running

    You may have melted the battery post with extended starter run time on hard to start issue.
  14. R

    Kinda got carried away..... M1028 rebuild

    Prayers for a full recovery and you can enjoy life and living to see your project completed!
  15. R

    Fuel filter and fuel pump mod

    How much diesel is in your fuel tank? Thieves like to steal fuel too!
  16. R

    M1009 transmission service.. hopefully a bad joke?

    Looks NICE!! And will last a long time!!
  17. R

    M1028 Gen 1 Light On

    Take the alternator back where you bought it and let them test it. If it is not working they should replace it.
  18. R

    M1009 transmission service.. hopefully a bad joke?

    Looks like the filter bolt bushing (spacer) to me too.
  19. R

    Hello from Oregon

    Welcome aboard!!
  20. R

    Aloha from Hawaii

    Welcome from western Oklahoma!!! Is Magnum PI still around?
114,126members
167,083threads
2,352,440posts
15,528online users
Top