Search results

ok I'm geting ready to repaint my truck so I need to figure out what tool's I need. I have two spay guns a craftsman suction feed and a De-vilbiss touch-up gun,should I get a chep pressure feed gun or try and go for a good one I wont need to paint much maybe a piece here and one there,and should...

on the road no.

hehe sounds like fun, man 60mils most have done a number on the tractor's tires.

those front brackets are for lifting the truck from a ship's hold.

um let see, yes it's just straight pipe, the engine is a Continental/White/Hercules LD(T)-465(1,-1C,1D) 478CI the whistle is from the tip's of the turbo's compressor wheel going supersonic.

cool thanks.

maybe as a Ambulance?

3.5 inch.

deuce's with a turbo engine dont have a muffler the exhaust is 3.5" any thing else?

can you tell me how it was hooked up? I'm going to add a mechanical oil pressure gauge for start up on the new engine.

cool thanks for telling us.

G744 I'm useing Gillespie's red oxide zinc phosphate primer then a under coat of epoxy primer and then two top coat's that sound right? and is it ok to apply the red oxide primer to paint thats really on or should I sand blast it all off I would like to avoid sandblasting the whole truck do to...

the MTVR? it's 7ton off road 15ton on-highway with a independent suspension sound right?

maybe I'll try the Gillespie on the engine and Fenders see how it looks, The reason I wanted to use a Polyurethane paint is the superior moisture resistance.

:ditto: my fender is different then low-tech-redneck's did they change over the years?

If I remember right early LD-465's had fire ring's but where replaced in the LD-465-1 and -C motor's.

no what I mean(I cant write) is what line from PPG or DuPont(there's to many for me to figure it out) can I use to paint the engine fender's and front frame area and can I paint with CARC in 50deg weather.

(integral fire rings)that's the one for $73 above.

got the deiver's side off, kenny going to try the unbolt the channel from the frame way on the other side.

I do that and I use jar's.