Search results

Re: RE: Re: RE: It Worked! :ditto:

I don't know anything about it, but clicked on one of the ads earlier. I think every one should click on them and check out the other sites. will not take long and you may find some good stuff. wink

only a couple inches i think. i didn't even look at the truck much, it was dark when we started. I will get pics later during the day.

15.5/80 R20 is the tire size I run 16.00 R20 on my 5 tons

I have heard it..hilarius lol

I bought mine in bulk for $30/ tire. most of them have flat spots and 3/4 inch tread.

I took my deuce up to the mud pit today to test it out with the new tires and rims. drove on the road at about 2100 and speedo said 47MPH. tires only had 35 pounds in them and you could feel it. I think they would ride beter on the road with more air. but it wasn't bad. off road performance was...

RE: Re: RE: Requirements in Michigan to drive a 5 ton. I talked to pat, his brother want him to go to my mudbog next year. I told him he could do recovery with the deuce.

:ditto:

under exemptions: This section does not apply to a person operating a motor home or a vehicle used exclusively to transport personal possessions or family members for nonbusiness purposes. MCL 257.312e(8) above the indorsements it says: INDORSEMENTS ARE ONLY REQUIRED IF A CDL IS REQUIRED I...

:ditto:

Re: RE: M543A2 front PTO 11 days??? woohoo

I guess the weld together shaft is about 130 then add the ends he said. how much can you get the ends for? can you measure the shaft dia. and the width of the u-joint, and the lenghth fro center of u-joint to senter of u-joint? I think that is enough.

sounds like he might be trying to get some extra cash. I never thought that 5 k made much of a difference. (I could be wrong)

I got mine stuck a couple months ago, not fun. I learned alot and if in the same situation would ba able to get it unstuck pretty easy. That rear winch sure is strong. I broke a strap rated at 45k with a single line pull.

I talked to the drive shaft place today. It will cost me about $200+ to get one made. He needs some info. 1. will the shaft go less than 500 RPM's? 2.what size are the stock u joints? will a 1000 series be strong enough? the next size up is a 1310. thanks in advance

:ditto:

let us know the results. I'm very interested

do you have a digital copy of those manuals?

RE: Ok Doc what a nice towbar!!!!