Search results

I was looking in the dash and I saw that this looked loose. What is this? What does it do? Is it repairable or should I buy a new one? I liiked through the electronics section from my TM and couldn’t find it. what is the part number if I need to replace it. One of its wires is coded 399. Thanks

You need to drill the holes a bit bigger. They should go on just fine. after looking at your photo, the circles might be bigger than the depth of your rail edge. would grinding down the circles work? Take a close look at how it is pressed on. You might have to tac weld it from the back before...

I see where your discrepancy is.

thanks for that info. i will have to take the current ones out to measure the hole. I guess it doesnt matter since I will have to redrill new holes.

it is a tight fit but yes it fits over everything tightly. I took everything appart so I will send you a photo later.

thanks for telling me what they were called. Took me 3 seconds to find after knowing that. 12339397-6 Mac motors has them for 79cents

I think i will need to find someone to mig the holes closed and cut new holes. does anyone know what the part number is for the screwable grommet?

the rails seem fine. It’s the holes on the a and b pillers. C looks ok.

Unfortunately this is not just a jiggle. I don’t believe the holes are in the same spot.

Hello, i was noticing that one side of my rails look lower. After removing the screws, it looks like there is a bushing and hole made from the factory. this is an issue for me because I have hard doors and it interferes with closing. Below are the left and right sides: are the holes...

if you buy a role of 250’ can you sell me a 10th of it? How much length is it for all 4 doors?

i do have a question for the seals you recommended. It is rated for 9/64 thickness. Will this sit properly? I found a site that allows for proper fitting but it is 450$ for a 250’ roll. you might want to look into this for future packages to see if it fits better. Too pricey for me since i only...

That door is not closed. It is opened and sitting on loose bolts. Just saying. I didn’t mount anything just a quick dry fit with loose hinges. i was happy about the c piller. i expected that there would be a big gap at the top of the c piller. It seems to follow the piller nicely It might have...

i still have to align them. He did good work rounding the x pattern. It is not just an x cutout. Time was taken on this to make it nice.

my doors are in.

Cant wait to get my X doors.

Any update photos of the window progress? the x-less doors from your facebook also looks awesome. I wish I would have thought of that. it has a cleaner look that the normal armored x door style. Good job.

I am so ready for your skins~

after speaking with the manufacturer, he designed it so that it fan use a standard seal that is not proprietary. This allows the seal to be replaced anytime with out breaking bank. He has a video on yootoob of the fit. Hopefully he make a better video of the fit and angles as well as top gap...

That sounds about right. It is reletively new but gives us another option of American made product. https://twistedmetalwork.com/humvee not sure of the quality but 2 laters of qtr inch thick aluminum from the top to the bottom, I’m sure it is structurally sound. I don’t mind being a gunny pig.