Search results

You may need the driveshaft for a multifuel as yours may be the drive shaft for the gas engine, depending on which vehicle the winch came from. I remember that there is a clearance issue with the gas driveshaft. People that have a w/w Gasser might chime in to a picture! Sent from my SM-G950W...

That is a fine piece of service work. The rear springs look like new.

"No problem". Never let your truck hear that! ;-) Sent from my SM-G950W using Tapatalk

Dipstick, you just had to say the last bit. You couldn't help it. Oh, well. Those two words....

IN Sent from my SM-G950W using Tapatalk

The way this works is that you fix things so the truck works sufficiently for you to find out what else is broken. Initially, that may require a few beers on your part to adapt, but after that it is pretty painless. After all, you have the parts vendors book marked and the Deuce specific tool...

Regarding TRACKS around the rear wheels: I inquired with the manufacturer (see videos above) and a set of tracks to run around both rear drive tires would set you back about $10k. While it would be awesome and fun, it is too rich for me as a play thing. They recommend a set of tracks around the...

Please DO set up a camera and post a video of this epic sounding endeavour!

Dipstick, you know me already! :-) So far, winter is mild, a little snow, a little rain, generally just a bit below freezing. My theory is that every day without a foot of snow dropping from the sky is a win and makes real winter one day shorter. Let us know how it goes and good luck for the...

FWIW, I asked my friend who is a whiz heavy equipment mechanic and he pointed at his Milwaukee battery powered grease gun and said that this thing pushes old grease out like crazy. He said if the Milwaukee with the FUEL battery can't move it, he knows he has to disassemble the joint and clean it...

You have the noise standing still when PUTTING it into reverse - that suggests clutch to me. If it went into reverse fine but then resisted backing up and/or clunked, I would say parking brake.

Good for you to get her running again! I know nothing, so take my suggestions with a grain of salt: 1) The sender on the block and the gauge need to be matched. There is a 60 psi set and a 120 psi set. Mixing sender/gauge causes bad readings. That is one thing to check. Otherwise, if there is...

Adjusting clutch pedal free play as per the TM? If it only made a clunking noise when backing up, I would have suspected the parking brake assembly/moustache spring.

Ah, they are busy taking turns whipping the assistant seal installer. They'll get back to you after.

Your best option is an aluminium fuel tank from the M35A3. The steel fuel tank can be cleaned and cut/patch welded; from what you are describing, you would be better off with a good used takeoff. I have an intact one you can have for free but with the cost of the ride you'd be still better off...

Check on YouTube for Deuce starting videos...you can hear the low air buzzer there and compare! Sent from my SM-G950W using Tapatalk

She is a beauty! The blue suits her. The pics totally sidetracked me. What are we talking about? Sent from my SM-G950W using Tapatalk

Easy switch over. Did it a couple years ago. No regrets. Sent from my SM-G950W using Tapatalk

Wow, that sounds unpleasant. A few thoughts. When you switched to the big radials, did you correct the front toe in and camber as recommended? Many members reported that this makes for a much more stable front end. The speed sounds awfully low, especially with the tall rubber. Did the transfer...

Do you mean the one on the passenger side under the glove box? Sent from my SM-G950W using Tapatalk