• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. vanaisa

    Rebuilding after 15 years of storage

    import taxes for EU goods dont raise US parts prices for you. Lets see how EU answers for those (probably) raised taxes. We are in same boat, my friend. Exept that we are right near f**** russland :)
  2. vanaisa

    1984 M1031 Questions

    https://www.steelsoldiers.com/threads/cucv-helpful-threads.123199/
  3. vanaisa

    Central FL M1031 project

    I did same trick with mirrors. But i used hard plastic sticks - in case if i hit trees with mirror. Plastic breaks easier, no damage to mirror as with hard rivet.
  4. vanaisa

    Seems like this is turning into a build thread.

    Jeep U-joint shaft?
  5. vanaisa

    Throttle Pedal Travel and Kick Down Switch

    put thick washer or nut to switch lever?
  6. vanaisa

    Wiring Terminals for Glow Plug Controller Card

    look wire colours too, helps more.
  7. vanaisa

    Wiring Terminals for Glow Plug Controller Card

    https://www.steelsoldiers.com/attachments/cucv-glow-plug-wiring-diagram-2-jpg.231629/
  8. vanaisa

    A new (maybe) Gen 1 light question

    Maybe cucvrus explanation helps you? Higher fan rpm-s, more glow. Charging is OK by voltmeter. Mine is doing same thing with fan on https://www.steelsoldiers.com/threads/gen-1-light-heater-control.196910/#
  9. vanaisa

    Has anyone installed a cooling system upgrade?

    GM engineers know their thing after all.
  10. vanaisa

    Wanna hear a dumb idea?

    Maybe paint it pink also?
  11. vanaisa

    Glow Plug Tests with Manual GP Button

    I like to visually inspect. GP can be working and all but already slightly swollen.
  12. vanaisa

    Glow Plug Tests with Manual GP Button

    Yes, this is modification. Just remove plugs and test them separately. 12V.
  13. vanaisa

    Blanking plug standard - original - radiator - M1009 / Chevrolet Blazer K5 6,2 Diesel

    cucvrus wrote: --- Water crossover manifolds don't give actual head water temperature --- You: ---I just want an additional display that shows me the general engine temperature via the cooling water--- Why you want to install sender in place, where it shows wrong temperature readings? :confused:
  14. vanaisa

    M1009 Cap Plugs - Any Sources?

    Rubber grommet set.
  15. vanaisa

    M1009 Cap Plugs - Any Sources?

    I found right size caps in electrical goods shop.
  16. vanaisa

    New to forum, new m1008 owner, GEN 1 issue.

    sorry, can not find this topic, where was talks about external alternator exiter.
  17. vanaisa

    Seems like this is turning into a build thread.

    thanks, man. Hinges were my problem. Once lubed, hood opens like in new car :)
  18. vanaisa

    Leaking oil cooler lines behind fan shroud

    Dirty is dirty. Try to find actual leak points. Clean lines, run engine and check.
  19. vanaisa

    CUCV Heaven, My build of a 1009 and 1008

    Fuel heater is great thing, atleast here. We have cold winters and even with -27C my 1009 starts and idles fine without block heater. Yes, we have snow conditions here sometimes, when i can not drive close to electric grid.
  20. vanaisa

    m1009 ashtray

    Hehe, this is good idea. Thanks for link. (y) LMC does not even show his web page in our country but i have their .pdf catalog. Now i see what i need and i am sure i find something, that fits and works there.
Top