Search results

Oh that's great news then!! I really didn't know. So that kit is actually a decent one then. Advance auto for the win there...I really was not expecting much for 20$.

Yeah it was frustrating not thinking the new tank and lines that the return got pinched going in. The kit I got is called FKM which from what I can find is decent stuff...some searches said it was the actual material Viton is named after but not 100% sure. My son can replace them in about 20...

Ok so the last few weeks we've been fighting the return lines blowing off the injectors. I had the braided 3.5mm hose and 6.5mm clamps that didn't work. Then I found a dorman kit that had the 3.5mm hose non braided and 6mm clamps. Nothing held. So off the the kiss world and had him check the...

That's a tough one. Probably have to break down each one in the tm. If the outside harness is ok you could do pin for pin from the new one to it with simple connections. Hooking up the cluster would be the most work on the inside. Sent from my SM-S906U using Tapatalk

That's good then it's in the green. I was thinking it would work with the light turning on. It's getting a second ground from the 4wd light. I don't think I have a cluster out right now or I'd check to see if the printed board plug is next to each other. I'll look for one I probably do. As far...

Ok. Is it charging at 29 or so volts? Does the gage in the green? Is this your first one of these trucks? Sent from my SM-S906U using Tapatalk

Knee jerk reaction is the wiring into the cluster tape is crossed...have you ever had it work? Sent from my SM-S906U using Tapatalk

Good luck with that rain!! I looked at your pics on my laptop and it looks like there is a wire coming from the battery to the block above the gp relay already. You can run a wire from it to the top of your gp relay. You can see that in my pic. I used the original fusible link wire off the...

I didn't think of using the eraser trick! I like that better as I use 1000 grit sandpaper but it's sketchy since I could mess the board up!

I never noticed a hole in the card!! Great to know! That would make it very easy to remove. The one I just put in my sons 09 is very tight and wanted to try a different card but it fought me coming out.

Yes...I'm thinking that wire off the block should be 24 volts...which is wrong you need 12...the wire coming off the battery will give you 12 volts. You might have fried glow plugs with 24 volts going to them as well. Maybe that wire goes in yo the block to feed 24 volts to the relay it would be...

Ok, I'll try and remember all the parts you got goin on! First that wire by the alternator goes to a sensor in the head that looks like it is plugged right now...very front side by the injector. I'll hunt that part number out. The wire running to the glow plug relay is interesting...comes from...

Well that is your starter bracket for the front of it. Extremely important to bolt that back in there. Suggest you don't try to start it to much with that not in there. I'd check your starter bolts to make sure one didn't break or are loose. Probably be a good idea to pop new bolts in it. Real...

We're guessing school...he parks in the back since he's a night student. Work is wide open with cameras so we don't think there. Hoping some kid drives in with it mounted to his truck. They can be that stupid. Sent from my SM-S906U using Tapatalk

Yeah someone really wanted it bad! I bolted it on there with 3/8 ×16 grade 8 bolts with a lock washer and got them very tight. His truck didn't come with one but I found one on marketplace. We're gonna weld the nuts on the new one. Sent from my SM-S906U using Tapatalk

So it's happened, but I still don't get it. Someone stole my sons weight plate off his blazer he drives every day. I bolted that on about 6 months ago. We watched some videos of places he's been and go back a week and can see it's not there, so we have no idea when or where it got taken. So it's...

keep posting up if you have anything else going on! We all gone through enough that most anything can be figured out pretty easy.

Mine acts like that in the summer...it clicks on for about 15 seconds and the light goes out. Right now I am at 37 degrees so now the light stays on longer and once it starts I get a few after glows...I don't think the after glows happen over 70 degrees I think. If you used to get those I'd...

Nope that's normal...use the other battery for your ground and you'll find the real volts for that one alternator...29 volts total running is good!! Glad it's fixed.

So you got fuel coming out of the fuel filter but still trying to get it to come out of the hard lines at each injector. I just went through this last week. Got an engine running that hadn't run since 97. Start with fully charged batteries. I opened 2 on each side and did 15 second turn over...