Search results for query: splitter

  1. jcollings

    Flu419

    ...the 2 different machines and non availability on the 419FLU compared to the 406 unimog having much more availability. I know the FLU has a splitter which is a split rear gear I believe to shift 1st Then 1st high range when splitter is pushed up on the shifter and clutches depressed it...
  2. The FLU farm

    FLU419 SEE HMMH HME Owners group

    I tried shifting into high on the splitter once, just to see what the difference was, so I' no expert on this. But if I remember correctly, the clutch interlock switch must be activated or the shift won't happen. My clutch interlock switches aren't all that dependable (obvious when starting)...
  3. Speedwoble

    FLU419 SEE HMMH HME Owners group

    You missed at least one cause. 6. Rust in the crossover air line contaminates the air system and plugs solenoids, filters, lines. This is a known issue and covered in the PS magazine articles.
  4. M

    FLU419 SEE HMMH HME Owners group

    I did find a way to search this specific thread. See attached. The search for splitter in the parent unimog thread is https://www.steelsoldiers.com/search/2687061/?q=splitter&t=post&c[child_nodes]=1&c[nodes][0]=34&o=date for anyone else who is looking. I will perform another search using the...
  5. The FLU farm

    FLU419 SEE HMMH HME Owners group

    I dunno. Just did a search for "splitter" (under Unimog) and a crap load of stuff came up.
  6. The FLU farm

    FLU419 SEE HMMH HME Owners group

    There are a few threads specific to what's (usually) the splitter. But if you read the entire "owner's" thread there probably isn't a single issue that hasn't been covered at least once.
  7. K

    FLU419 SEE San Antonio mechanic mentioned in thread & throttle issue

    ...range 4wd (works as it should)...same outcome...3rd & 4th gear were somewhat useless if there was a slight inlcine in the pavement. Gear splitter always in high position. Tried it in low rang & 2wd and as suspected, speed is limited in this scenario. Additional info: cranks and starts...
  8. Speedwoble

    my flu419 will not move in any gear

    ...if there is no load? Can you engage the PTO and use the backhoe(if so, the clutch is working). There have been cases where the high/low air splitter on the 1-4 shifter got stuck between high and low and the truck would not move. You need to give more detail about what is and is not working...
  9. B

    FLU419 SEE HMMH HME Owners group

    Quite possibly, but the SEE is getting old and tired; the HMMH has like, 160 miles and 700 operating hours on it, post-rebuild at Red River.
  10. The FLU farm

    FLU419 SEE HMMH HME Owners group

    It'd be quicker and easier to add an electrically operated splitter valve to the SEE, wouldn't it? Then you'd have the same functions on it as on the HMMH.
  11. Speedwoble

    Recommendations - FLU419 review for purchase ?

    The brakes on the FLU are air assist hydraulic. So without air, the brakes will work, poorly. Also, in normal driving, shifting will not be affected. The splitter is pneumatic, but used rarely.
  12. M

    Recommendations - FLU419 review for purchase ?

    OK, thank you, I suspected all shifting would be interrupted/frozen. I was pretty sure brakes would be affected, suspecting it would trigger low air alarm and possibly lock brakes. I didn't think 4WD would be affected, but figured lockers wouldn't work. I'm glad I asked as it looks like my...
  13. The FLU farm

    Recommendations - FLU419 review for purchase ?

    You can still shift, but the splitter won't work. Brakes will lose power assist, and 4WD and diff locks won't work. I know it says not to drive before the air system is at pressure or damage can/will result, but I have yet to figure out what that damage could be.
  14. P

    FLU419 SEE HMMH HME Owners group

    I did consider putting a woodsplitter fed off the SEE hydraulics but decided a separate splitter is less hassle.
  15. M

    Soon to be a new FLU419 owner (maybe)

    Can you expand a bit more on the splitter valve? I would like to attach a bush hog attachment on mine. Thank you! 817-966-6969
  16. simp5782

    See loader bucket

    You have to run a splitter valve for the rear pto to run front hydraulics powerful enough for the skid steer stiff. The belt driven 9gpm pump won't work. @profo has a few extra bucket and arm sets. Tires found here https://www.ebay.com/itm/254678641001
  17. coffeehouseforge

    Soon to be a new FLU419 owner (maybe)

    Thanks for the info. I am looking at putting on a skidsteer plate to include their attachments. Good info on the splitter valve. I appreciate it.
  18. simp5782

    Soon to be a new FLU419 owner (maybe)

    You can add a splitter valve into the rear hydraulics to be able to run any skid steer attachment on the front. Add the skid steer plate to the front arms and you can roam around with a hydraulic bushhog cutting trees 6ft in the air. And any other attachment you can think of. There are...
  19. P

    Lets talk Air Dryers for SEE

    ...design features of the SEE that can be blessing and curse is the use of air assist for all sorts of systems. Brakes, 4WD, Diff Locks, Air Splitter, remote throttle and probably one of two I missed. Add in low pressure air pressurization of the brakes and axles and there is a lot of air usage...
  20. T

    Flu419 SEE troubles

    I had a similar issue happen shortly after buying my Mog. I was taking a friend for a ride around the bock, Put the Splitter into low and nothing. I had front hydraulics as expected, but no gears. I did not try the PTO. I could hear and feel the clutch engaging and the sound of something...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks