Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I can really use some help I have a 6.5 na rebuild by meltons is 09 if the odometer was t changed only has 6k miles I noticed oil in the coolant 9 months ago no coolant in oil. Was told head gaskets my mechanic has the heads off and say they look fine and the gaskets that he don’t see how oil in...
Ok maybe someone has some insight I’m having a weird problem. To start my fan clutch moves in and out with my air compressor hooked up to the can shroud. I have replaced 2 Cadillac valves,time delay,water crossover sensor and 2 thermostats and the hoses from the Cadillac valve and the fan stays...
What’s everyone doing for a turbo doghouse am/fm radio setup? My 6.5na I have the Midwest military am/fm premade radio box but it won’t fit on the turbo truck.
So today I noticed when accelerating I hear what sounds like a quick rubbing noise from the middle of truck. It’s a 4 speed. Looked underneath don’t see anything leaking from trans or transfer case. Checked trans fluid was on the money. It only makes this rubbing noise when accelerating then...
My trans harness plug that plugs into the side of transmission I notices seems loose. I can wobble it but I can’t push it in anymore I turned the ring on the end it goes a little each way and nothing? Trans is working no trans light on just wondering if this is normal?
Sent from my iPhone...
I’m looking to find out what my next steps would be to diagnose my problem. I have a 6.5 4 speed and the trans holds high rpm at low speeds without kicking down. 2200rpm@50mph. I changed the trans fluid that’s all so far. Anyone give me some advice?
Sent from my iPhone using Tapatalk
Has anyone installed the 3 light pod that goes in the center of windshield? If so can you please show me where you drilled to get the wire to the inside?
Sent from my iPhone using Tapatalk
Anyone know of a complete bolt kit for an airlift bumper for sale? Or know all the sizes so that I can order them online?
Sent from my iPhone using Tapatalk
Can someone give me any direction if the h1 brush gaurd will mount to my a2 bumper with no modifications? Here is a pic of my bumper
This is the bumper I want to buy
Sent from my iPhone using Tapatalk
Can anyone tell me where to get red dot replacement parts like the low and high pressure switch and the 2 relays behind the blower? I have no part # and can’t find anything online.
Sent from my iPhone using Tapatalk
Maybe someone has a diagram on the hose hook up on a red dot ac system with a rear mounted condenser set up. The previous owner said he tried to hook it up but it never worked. I took it to get charged today and the compressor just clicks and the fault light says check compressor clutch. I’m not...
Can someone tell me what part I need to complete the self canceling turn signals I have the ring mounted around my steering column.
Sent from my iPhone using Tapatalk
I want to keep the same camo patter but repaint it. Did you guys that have repainted camo use free hand or tape off each color? Can’t find any stencil online or anything like that.
Sent from my iPhone using Tapatalk