Search results

Anyone have a unused connex box? A friend is sitting on 1300 acres that are currently underwater. Probably 5 feet from the house. We may need to sandbag, and may need additional help. It's in glynn la. He was supposed to have a connex box yesterday, none today

i am CONTEMPLATING resto-modding one like my wc53 WAS. matter of fact, using the running gear from the wc53 in the wc56 can anyone tell me how well they seal with the doors on? the m715 was fine, but i need more seats!

Saturday, 10-30-10 at approximate 7am I was traveling between 60-65 on interstate 12 in baton rouge and was rear ended by a jacked up Chevrolet doing between 80-90 or more. Snapped the 1/2" cab bolts, bent the rear frame, middle frame, bent the rear cab in about 10", and bowed my walls out and...

i need some help. # 7 per the diagram bolts to the front of the a-arm. the top two holes do not have a corresponding place to attach to # 4. even if there were holes, the angle from # 7 does not sit "flush" with # 4. help, please!

anyone have any idea what the tongue weight was/is? it bent the 6000lb/600lb tongue when we hooked it up. http://web.mac.com/ltalessi/iWeb/Site/trailer%20pull%21.html

a guy needs me to move a office trailer for him. 12x 40. so...... i fabbed up this class 5 hitch and 10" drop. if yo look i dont think it can really be bad on my departure angle off road. (minus the hitch of course) http://web.mac.com/ltalessi/iWeb/Site/m35a2%20trailer%20hitch.html if you...

ok, i just picked up a deckover pintle pull civilian trailer with electric brakes for the deuce. i DO NOT want to convert to air brakes on the trailer, so what/how do i run an elec brake controller on the trailer?? i dont mind slapping led's on the trailer (they run 12 OR 24 volts). i just...

anyone have a spare passenger side door lock mechanism? the outside handle no longer works (the gears in the door are stripped) and the inside BARELY works. anyone????

http://cgi.ebay.com/ebaymotors/19-5-Accuride-6-hole-wheel-pntd-grey_W0QQcmdZViewItemQQcategoryZ43959QQihZ005QQitemZ150006901857QQrdZ1 wont these fit??? maybe he can get more that cheap

i need a copy of the manual for my m35 and for an m151.... anyone have it on pdf?

i have A kentool tyre tool, and a duckbill mallet. while under severe exhaustion i decided ill buy better or correct tools. what tools do i need? what do yall use? i see there are ken tools for firestone rims (arent deuce rims firestone?) do i need a slide breaker bar, a bead busting...

i need two of the "turnbuckle" deuce dropside bed pieces that tie the dropside bed side to the floor for support. anyone have any?

i just listed it in classifieds. my wife is going to have a fit in the AM when she sees all the stuff i got. it will be scrapped if someone does not take it. i may have a set of troop seat uprights too.....

is the ambulance part all aluminum? what is the difference in weight between a m1008 and m1010 (so i can GUESS the total weight of the presumable aluminum content)

http://gsaauctions.gov/ click on louisiana 71FMPI06321018 i can pick it up and help get it shipped

can anyone tell me if the deuce and 5 toon drop sides are the same? as in are the SIDES the sae ( i know the 5 ton is a 14' bed, bt there is two feet that doesnt drop.) i need a side for my bed

ok. my injector pump is SPEWING diesel from the base. looks like the gasket seal is bad. maybe the P.O. used gasket sealer (rtv) last time. when i fix it should i run gasket or rtv? its the part of the injector pump where you turn the fuel up, not the output part

http://homepage.mac.com/ltalessi/PhotoAlbum112.html the engine and tranny fit better than they did in the m715. the engine is REAL low, and i like it! my center of gravity should be lower than it was stock, which is nice considering the 3/4 ton body was lowered by dodge due to the 1/2 ton...

http://homepage.mac.com/ltalessi/PhotoAlbum109.html

http://homepage.mac.com/ltalessi/PhotoAlbum106.html 6 hours of work!