Search results

At a recent mudfest my M932a1 tructor tranny got warm 275 degrees (I had dex 3 in the tranny). I was doing some heavy pulling. The engine temp stayed cool and since my pulling speeds were so low the tranny never got good cooling. I did change the fluid and drop the pan and change the filter...

Took the deuce out for a fund raiser for one of our vets who was wounded last year. Big turnout for a small town. Ross, 2buells, brought his new to him xm813 as well. Good time and the guest of honor climbed up in my deuce to play with the 50. Didn't get a pic though.

After installing a dome light in my deuce and liking it, I decided to do the same for my 932. The unit itself is grounded so all that's needed is a power wire. I decided to just tap into the battery directly and put a 5 amp fuse in line. Works great and you don't have to turn on the...

Well thanks to Phil, Stonepicker1, my drop side deuce bed arrived in great condition. Started with cutting out a 3' section and rewelding it back together so that the troop seats would fit when also shortend 3'. The process went quickly only because I had a friend of a friend with a service...

I've done a search and been through the TM's, no help. I would like to have my drivers wiper blade park to the right instead of the left where I end up looking through it whenever I drive (M932A1). Is it as simple as switching the lines ? ....... Swap lines at the wiper air switch...

Well my 932a1 starts ok with the cold its just the air system doesn't like to cooperate. My parking brake sticks in what ever position its in. I've learned to leave it off and chock the truck so I can move it if necessary. A new issue turned up, the air pressure regulator is not shutting off...

I've been through the TM and searched the forum. My IP is dripping out the bottom somewhere. The HH is fine no leaks, and no transfer of fuel to oil, my FDC has been bypassed. It seems to be dripping from the bottom but its hard to tell exactly where ? Are there any problematic areas that...

Don't get me wrong, I really like my M932A1. I just got all the bugs worked out except 3 leaky tires. But there has got to be times when you wish ........ Anyway, I hate my 5 ton when; I pull up to the diesel pump. After driving my Deuce around for a year and getting 9-10 mpg, this 5...

When you manually engage the front axle the "Front Axle Engaged" light comes on above the steering wheel. When you shift the transfer into low that also automatically engages the front axle. Is the Front axle engaged light suppose to come on with the transfer case in low without using the air...

I've been through the TM's and I just want verification before I start. No help there. In the picture; item 3 is the transfer case drain. Item 2 is the servicing plug. Item 1 is a magnetic plug that doesn't seem to have a opening to service. Item 2 is a 5/8 square nut instead of the 1/2...

The truck builds air great. Then when I take my hand brake off it starts loosing air out of the left middle axle brake assembly. Put the hand brake on and all is good. It is coming out of the brake assembly not the tube on the air intake. Any ideas ? I've looked through the TM and its not...

Started to fill out my sf 97 and not sure what to put in the blanks to submit to GL. I have read through the posts but could not find anything on tractors. Year: 1985 Make: AM General Model: M932A1 For the vin I plan to use the identification number. C0532-00397 It has letters...

I've been through the TM's with only one reference in Vol 1 24-1 page 2-160 regarding this. Both of my pressure switches are working. When I disconnect the main cable from the failsafe warning control module the light and buzzer go out. The TM says to replace the buzzer but I can't find where...

Well it made it home this morning. I decided to have it transported instead of driving the 650 miles. Cost me about $400 more but no hassles or worries. I did a quick check and it seams to be leaking coolant from the heater core. That will be top on the list to fix. I need to see if I can...

Just won a 932a1 and am looking for possible transportation next week from Camp Shelby, Ms to Troy, Mo. 63379. Starts and drives middle axle has low tires possible flat. Paid in full no EUC required will have insurance shortly. Pickup times available are by appointment; Nov 29, 30 and Dec 1...

I know the big difference is the super single setup of the A1. Is there any other difference? I tried searching but couldn't find any specifics. Did the transmission ratios change to accomodate the bigger single tires ? Or, did they just single them and make a speedo correction ? If they did...

http://transportmuseumassociation.org/images_1/It's-Justin-Time.pdf I will be bringing my Deuce and possibly my 43 GPW to the event to help CPL McLoud. Any folks in the area please stop by or if you have a MV come on out. Things kick off at 10am I plan to be there no later than 9am. I will...

I looked through the TM's and posts and didn't find anything about what this is on my gun ring. I believe its to hold the barrel down on an M2 but I can't find anything on it or where I might get the parts for the hold down. Anyone ? I would really like to get the parts but can't locate a...

I've been searching for a while and the only reference I can find for the Air O Matic is in 361-24-2 for maintenance. Does anyone know the TM for the installation and the parts listing and numbers ? thanks

I'm looking for a hard cab top with the gun cut out. Anybody know where to get one. I did a search without much luck. The vendors/classified section doesn't show any. I really don't want to modify my existing top since its kinda rough and would rather just replace it. I don't want to go...