Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
This one has me stumped!
The issue I'm having is that the motor won't return to idle correctly, almost like it's starving for fuel. When I let off the gas suddenly, whether shifting gears or just a simple rev of the motor, the RPMs will fall below the idle set point. It sometimes recovers and...
I need some help ID'ing a brand new turbo I have and the motor(s) it would have been found on. I have found that it was used on a Mack but no model number of motor. Thinking it might be for the M39 series with the Mack ENDT-673? I want to sell it but need to figure out exactly what it is and is...
I've got an M35A2 with an LDT 465 that I'm working on for a friend. It's having starter issues. When you push the start button the engine will start, but it makes a grinding sound as it is turning the motor over. Almost like the starter gear is slipping on the flywheel teeth. I checked and made...
Ok here is some back story to the current problem, don't know if it is relevant but can't hurt! It's on my 1965 M35a2c LDT 465-1c D turbo
Stuff started acting up when my brother and I got back from a 600 mile trip in 0 degree weather running WMO and a heavy load. The truck had a hard time...
I had the synchro in my airshift Tcase go out in my truck, so I'm going to attempt to use the synchro out of a sprag transfer case I have laying around. I need some advice and tips/tricks on how to get this done. Any special tools required? Are the gears pressed on the shafts? Torque values? I'm...
Need some opinions! Looking to possibly buy this M108. I don't have much info on it, but what I do know is: it runs, everything works, it's got the OA 331 gasser, it's used regularly for business reasons, and its only 200miles away!! I know it's not much to go by, but what's a ball park figure...
Ok I am in the process of replacing the exhaust manifold gasket on my LDT465-1C. While removing the exhaust nuts lastnight, I had one bring the stud out along with it on the #5 cylinder. When I got it all the way out coolant started pouring out the hole where the stud came from. Is this normal...