Search results

If your using aux tank for refills with bung adapter and 55 gallon drum empties, will aux pump running dry harm it? How long should it take to prime with dry hose in full 55 gallon drum. Should have asked sooner as ETA will be here Wednesday

19450-1 IS THE PART NOS OR THE NEWER 19990-1

I found my answer searching threads, I have supposed 802a.pdf wiring diagram. That's only part of it. Have the TM-9-6115-641-24. But I can't find stuff like the convenience receptacle wire to see that it has breaker

It is about 4x2x6 and I was thinking right wall behind control panel and then bring 110VAC cord out the blank on bottom right side , next to the aux fuel line compartment.. From looking at the wiring diagram I planning on connecting the charger to terminal 4 on the MT4 Amp meter shunt for the...

Are the steps detailed in any of the manuals? Mine won't warm up, so I've got a new stat and gasket. Appreciate any advice

This is not about any particular generator, mostly about learning about how they work and loads. This is new 36kva Perkins turbo/meccalte single phase alternator and a Deep Sea 7320 line monitoring controller learning curve about loads. The 36kva genset set shutdown, Deep sea controller watches...

Here is Pic of a home made tank drier vent, that 2 lbs of silica gel inside that clear 4" pvc. on top are two check valves with a 1/4 lbs open rating. The top and bottom 2" reducers are not glued. Wiggle the unit out take inside remove the top pour crystal on cookie sheet heat in oven at 250...

What we found when pulling a permit for any generator install. Due to the new wind regulations your unit has to be installed on a wind approved base. Which means the force on the unit has to be calculated according to your location. For me it is 150mph which delivers like 60 lbs per square inch...

Where do I get the boot you tie up around the load cables. Trying too mouse proof it

My friend wants to use all three legs to get his 15k out of his 804b. Setup is he is in mobile home power feed from a pole with his main 200amp and trailer feed through the lug bars [see pic]. His AC two double 60amp breakers, well 20amp double, barn 20 amp single. So what I've found is 100amp...

Mine is stuck in my truck bed until my new tractor with FEL shows up to lift it out. So I want to rodent proof with 1/4" wire mesh. For the hole in the bottom I want make a small frame like a window screen then use 3m double sided tape. That stuff really sticks and lasts for years out in the...

Kurt Klopp https://www.youtube.com/watch?v=s3r3_PmTPQc Anybody heard anything more about it

What is the status of the project, just bought one

this the only thread that let's me post? How come?