• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. D

    The things I learned while rebuilding my CTIS

    Took them all apart cleaned them rubber looked fine, and resembled.
  2. D

    The things I learned while rebuilding my CTIS

    So now I have my leaks fixed and tested my CTIS and it cycled through the setting deflating and inflating the tires. Road test went well parked it and there was air releasing from the vent located above the rear Dif. It basically let the Passenger rear tire go flat. I inflated the tire with an...
  3. D

    The things I learned while rebuilding my CTIS

    My right front tire on my LMTV looses air slowly so I gave it the soap water test and fond it leaking on the manifold end that connects to the tire fill side. When comparing to the other wheals I noticed that there are two different styles of this connections The one that's leaking is larger...
  4. D

    Steel Soldiers giveaway sponsored by hawkerbattery.com

    Hope you had a Wonder full Thanksgiving, getting the LMTV ready to go and get a Christmas tree with the family.
  5. D

    MEP 1040 3661- maintanance Item Active

    Thanks for your help , found it in the manual will go through the steps indicated.
  6. D

    MEP 1040 3661- maintanance Item Active

    Warning 3661 came on indicating first service due in the next 25 hours. I do not use the unit all that often so may be some time before I hit that mark. Problem I have is I can't turn the warning off have gone through the maintenance section on the control panel and this 3661 does not come up...
  7. D

    ECO DIRECT DRIVE HUBS

  8. D

    ECO DIRECT DRIVE HUBS

    I have had the same results great mod, Got up to 70 no problem except for tire balance, 60 still smooth as I creep up from 60 I can feel the tires start to shake the truck. I can't decide how I want to go with balancing two ways I have read up on are beads or antifreeze .
  9. D

    ECO DIRECT DRIVE HUBS

    Just Had a local Diesel Tec in Balt Co. install a set on my 1078 . The parts are spot on, machining is excellent, all the bolt holes line up exactly. Felt the improvement as soon as I left the lot. Will get it out on the Highway this weekend to give it a full shakedown. Not sure why but the...
  10. D

    ECO DIRECT DRIVE HUBS

    Please let me know total cost with shipping to Sparks MD 21152 and preferred payment method.
  11. D

    ECO DIRECT DRIVE HUBS

    I am interested, 1078 2 axle
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks