• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    MEP-803A whole house standby generator

    Right there in the cap.
  2. K

    MEP-803A whole house standby generator

    Tank is 32" wide, 60" long and 12" tall - 1/8" steel - 99.7 gallons when full. The two long edges were bent in a break and the short ends were welded in. The top edges were bent in a break to give the guys a lip to weld the top to. Blew a hole in the bottom of the generator case to run the...
  3. K

    MEP-803A whole house standby generator

    Wish i could, but I had the guys in the back build mine as a favor (government project). I think it would be frowned upon to start up a production line! The tank has the same dimensions as the generator case, and approximately 13" tall, giving it a volume of just under 100 gallons.
  4. K

    MEP-803A whole house standby generator

    I had the guys at our shop build it for me. Ran the aux fuel line through the case and plumbed it with the fill nozzle in the front bottom door.
  5. K

    MEP-803A whole house standby generator

    Wet sanded the generator to get rid of the chalky tan and the gray came from Lowes. Made the stencils on a silhouette vinyl cutter. Searched for logos online, but nothing. Just typed up a couple different fonts that i liked.
  6. K

    MEP-803A whole house standby generator

    Thanks to the help of several on this board, and specifically Kurt Klopp's one wire start and transfer boards, I've finally completed my whole house standby unit! Wanted to share the final outcome. MEP-803A 10k Generator 100 Gallon bulk tank pedestal Generac automatic transfer switch Auto...
  7. K

    MEP-803a - Auto start and transfer

    New to the message board and new to my MEP 803a. Looking for info on auto start and auto transfer with my 803. Had a Generac RXSW200A3 auto transfer switch installed. Also purchased and installed a 2 wire remote start controller kit for the generator. Both work great, but still working on...
  8. K

    mep-803a coolant temperature sender

    Tried that route as well - Napa and Oreilly's, with no success. You are correct - 450 to ~30ohm. 1/8" NPT
  9. K

    mep-803a coolant temperature sender

    Hope this isn't too old of a topic to reply to! CANNOT locate a temperature sensor/sender for my MEP803a I've looked through the TM and located the part number ( 127338 ) and stock number (2990-01-366-0735) I've searched the internet with no success - Nothing on ebay. Tried a universal one...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks