Search results

Looking GOOD! I was ready for snow this winter but we have only have about 2" total. A couple of years ago we had over 3 feet of snow by now. Happy Trails :)

Merry Christmas and Happy New Year from Annex Oregon too!

Hey, I'm about 75 miles away in Annex "Ontario". I have a full shop and can repair/make anything you may need. Give me a call if you still need help. Paul Kingsbury 541 325 6027

Thanks Jbulach for the reply. Putting your truck into the creak is a good test for articulation and clearance issues. Did you put a wood floor into your bed? Would you happen to know what your hoist is rated at? Thanks again and happy trails :) Paul

Looks GREAT :) I want to install a hoist onto my 923, I've been thinking about the tailgate, maybe making a frame for the rear of the sides don't flex out; also pivoting the top of the tailgate to swing open on the bottom for some spreading abilities. How high are your sides and the front that...

Welcome Merle, when you get it running and need to go for a road trip I'm over in Annex "Ontario OR" come on down and we can go for a ride :) Happy Trails, Paul

Need waterpump hauled from Nellis AFB "Vegas" to North Vegas "Fastenal Store"! Hey guys I'm looking for a pickup of a water pump which weighs 120 lbs, and 18" x 21" x 21" in size. It is sitting on a pallet, which they will load or just put the pump into a rig. I've got Fastenal to ship it from...

I’ve wanted to do this mod for a couple of years; but as things go I haven’t got it done. I also like the idea of using a front axle engagement switch to accomplish this. The reason I want to engage the fan is to use it as a cheep power retarder when going down hills. I’m willing to buy the...

Welcome, I'm down by Weiser. Happy Trails :)

I think you have “can” answered your own question. I havemany of the same types of equipment as you. My 923A2, 6x6 weights about 23,000lbs pulls almost the exact amount as my grader, which weights about 27,000 lbsa 6x4. I also have a Dodge 4x4, weights about 6000 lbs, and a dump trailer. If the...

Welcome and happy hunting for your new rig. I just moved from Bend this last summer and moved to Ontario; I have a 923A2 you can look over or call and I'll give you some info. Paul

I would like to know the specs or number of the belt you ended up using. I'm planning on using this type of setup for some hyd acc on my 923A2. Thanks, Paul

Well I'm sure it's no worse than my grader :) Thanks, Paul

Thanks Matt Is this in low range? Paul

I’m just a country boy and was wondering about pulling animplement about 5 mph. I would really appreciate some information on thesetrucks. I need to know how fast these will go in low range for 1st and2nd gear? Thanks, Paul

This is a good question :) The rear hubs have a 5/8" pipe stud and the front axle has a 1/2" pipe stud. I had to buy 2 different plug cap kits to get both sizes. Paul

I've read allthe replies, In my opinion, one or more of the tires are out of balance. I hadthis same problem with my 923A2; when I removed the CTS and weights I got ridof almost all of the shake. Good luck, Paul

The long and short answer is to recycle the tank and chalkthe experience up to only buying a clean tank in the future. The tank can becleaned and coated but this will cost you much more than a good used cleantank. Good luck, Paul.

Welcome SP5 from anouther SS member and fellow 63BH8 Light Wheeled Vehicle Mechanic. I have a new to me 923A2 "5 ton". It is a GREAT truck; if you have some questions about theses or other THINGS, let me know. I'm over in Bend, so if you need a Sunday drive, come on over and we will share some...

Here's one in Bend, OR on claiglist. http://kpr.craigslist.org/hvo/4229980121.html Paul