Search results

Yep, Been reading through all the post and that seems to be an absolute must. I even find being under there, when all is working as it should, being a little spooky!!

Great information. I will hopefully get to work on this shortly. Thanks for the replies.

Hello Agazza2 Just started working on this truck again. (its been an interesting journey) Did you find the issue with your hydraulics?

In

More Power!

It took years of looking, trading and bidding to accumulate all of the hardware ( and a pile of cash ). The PRC-138's ARE pretty rare and pricey! These days, you could expect to spend $6K to $8K for the 138 and vehicular adapter. Uncle's scrapping operations have had a NEGATIVE impact on...

It looks like there is something after the K1 but the crimp tool that put the ring on did a lot of damage to the numbers after the K1. I will need to get some optical assistance in the morning to try and decipher what is there. Do you have an idea of how many other alpha numerics might be there?

Rain stopped and wind is down to 30 mph so here are a few more. Kinda of cluttered until wire loom arrives......Geeez, how is it that every tool I own is now in the cab!!

Hello All, Thanks for the additional information. I made one of those 'command decisions' Friday evening and started the process on the LMTV. Didn't finish up until 2330 hrs Sunday night. No opportunity to take PROPER photos of installation yet as we have had rain and 50+ MPH winds in...

Atttached are photos of new air bag and data sheet supplied on this forum by another user.

I have a new one that should arrive today. I can photo and measure it this evening if you like.

Hello All, I am in the process of installing a Harris HF antenna on my LMTV. This makes installing the matching RF-382 antenna coupler a necessity. My intention is to mount the coupler with its matching vehicular mount on the back of the cab (outside) high on the driver side. I have both...

Most unique way of changing oil I think I have seen!

Hello Joe, Almost all antennas will require a metallic ground to their mounting surface except for a few that are specifically designed for non-metallic surfaces. PM me and I can help you through this. Just installed a digitization rack in my LMTV and mounted Motorola VHF, UHF and Harris HF...

I am looking for any information I can locate on a drivers side antenna mount for the LMTV/FMTV series trucks. The curbside antenna mount is very common with NSN 5985-01-440-1322 (part# A3210717-2). I am searching for the drivers side version of this mount. I think (but cannot confirm)...

Fitted up M66 to LMTV today and measured for the spacer ring required to stop the M66 from rubbing on the cab. In the process discovered I may be missing some parts for the M66. Checked other threads and pubs forum but don't see a maintenance manual for the M66 that would have a parts...

I have not tried to rotate the fan by hand so I can't be positive on that aspect, but it would appear that should be how it works. i would start by loosening the fan clutch air line at the output of the solenoid to verify that there is no air pressure trapped in the line. My solenoid was flaky...

Is there a hydraulic schematic of the internals of this hydraulic control block that might designate the functions of the components, as in, check valves and reliefs?

Have a '98 M1078 that has developed a problem with the cab hydraulics.( They used to work fine.) I have read through most of the hydraulic threads but this one is a pretty strange. The spare tire system seems to operate OK and this issue is only with the cab. The cab hydraulics seem to almost...

My '98 M1078 has that same little wire on the outside of the harness.