Search results

koolex11 - I have attached pictures of wheels that stazworks (http://stazworks.com/index.htmcan) can make with the M37 or M101A1 5 Lug pattern on them. These are wheels that he built, so you can see the quality of the work. He does a whole lot of wheels for Rock Crawlers and 4x4's so he does...

New Data Plate Sources I also need a new one for my M101A1 and I found the following source on the internet. I know I found one other one, but I cannot find it in my favorites now - it seems like it was a Military Surplus Place that also did Data Plates. Maybe someone else has another source...

koolex11 - Good luck as I have had the same problem, but I did not want to go with the axle swap because then I think it will lose some of it MV look and I am not real sure if you could integrate the parking brakes on the new axle and then you would lose the dumping ability of the trailer as...

Tubeless Wheel Option for M37's and M101A1's hurtlec (I will take your advice on Stockton Wheel) and all those looking for an alternative tubeless wheel option for your M37's and M101A1's (5 x 6 7/8 inch Lug pattern). Stazworks in Merrillan, Wisconsin will recenter a HUMVEE Wheel (Wheel size is...

Powder Coating Price to Good to be True I agree with you 4x4 Forever. Your 2 Cents has held up well against inflation. I may just stick with having them sandblast it and then spray it with the help of my brother-in-law (He has all the equipment and some experience for automotive painting) with...

Thanks quickfarms. I was born in Covina. I contacted ARC Sandblasting in Azusa at 626-334-1516 and described what I wanted done and the closest thing they could compare to it was a sandrail frame and they said they would sanblast and powder coat a sandrail for $200. I figure a M101 Frame has a...

Hilarious Tag Line swbradley1 - Not on subject, but your tag line is hilarious. You can use anything as a Suppository as long as it has at least one rounded edge. - Haspin '11 :funny:

Sandblast and Powder Coat Thank you twa@ezdn.net and ryker725 for your responses. Hopefully the $200 price will hold up. They gave this to me over the phone from my description of the work to be done, but I have to take it over there for a firm price. Any experience with how powder coated paint...

Anybody ever Powder Coat the frame of a M101A1 or Powder Coat the Bed or powder coat anything? I put pictures in my Photo Album on the M101A1 Project. It is slow going with removing the paint and grime for my new M101A1 and I do not want to have to wait that long to use it. I got an estimate for...

M101A1 Project progress pictures Thank you for your recommendations Ripcord01. I have posted some pictures of the M101A1 Project. The last picture shows the undercoating or road grime on the bottom of the bed - the black area on the upper right of the bottom of the bed is where I grinded on it...

Bought my first M101A1 and I am working on redoing the wiring, busting rust, and painting it with the help of my brother-in-law. I will post some more pictures of the progress when I can download them from my camera. I pulled off the bed to get better access to the underside of the bed and the...

M37 / M101A1 Tubeless Rim Source Hi "deaner450". I have called the company at this website Welcome to Stazworks extreme offroad web presence! and need to make some measurements and take some pictures and get them over to him to get a firm price. He said $150.00 to $175.00 per wheel. They are in...

First Post. I have learned alot from reading all your posts about the M101A1 that I just picked up from GL a week ago (I have attached pictures - hopefully I did it right. It is a 1968 Case-Master). Everyone seems very willing to help in this forum. This is my first Military Vehicle and I am...