Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have a concern about snapping off the screws for the hold down clamp.
On page 5-187 of TM 9-2815-210-34-2-2, the instructions state to tighten the screws to 150 to 175 pound-feet. That seems like an awful lot and I would take a real chance on breaking the screws off. Is "pound-feet" correct...
After 9 Saturdays beating on it and soaking for two months with Kano Kroil I was able to get this stuck fuel injector out but in the process I broke off the fuel return tube tee fitting on an adjacent fuel injector. I was wondering if anyone had a resource I could by a couple of these from?
Is it OK to use 10x20 tubes in the 1100x20 Goodyear Tires. Tire guy i just talked to said that was what he was used to using. The 1100x20 tires will be on the stock Deuce rims, which are 9x20, correct? or wrong? :-?Thanks
I have had my Deuce for about 6 months and am going to replace the current tires with Goodyear G177's. The two questions I have are: 1) is it necessary to use tubes and flaps with these tires? and 2) if that is the case, is it necessary to use tubes and flaps on any tire mounted on a Deuce...
:arrow: Starting a new thread to ask the following:
I'm heading to Geismar, La., Tuesday morning to pickup a 1975 M35A2. Since this is my first experience with a FMV, gimpyrobb recommended I see if there were any FMV owners in the area to take a look at it before I finalize the deal.
My...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!