Search results

I had the exact same issue where everything seems to check out. suspected the fan switch so purchased a new one and it would never turn on the fan. It did not have the blue tag on it, and did not claim to be oem. Very resonably priced. Wired in a manual switch in place of the fan switch so...

IN

I replaced the thermostat with a 180 degree high flow miloden that was referenced in some other thread. Put my old fan sensor "thermostatic switch" back in. After a couple of road tests it seems to be operating normally. Fan comes on when my temp gauge reads 220 degress. Didn't time the...

Not sure why it matters where I bought the fan sensor. There are 20 different places you can get them. Even thought I purchased from Oshkosh it was advertised as the correct replacement for the HMMWV as you can see in the pictures I posted. Not sure I will purchase from them again as they...

I checked the power steering fluid level, it’s good. If the Cadillac valve was sticking why can I manually turn fan off any time it’s running by flooring the accelerator and engaging the TDM? Turns off for 15-20 seconds then comes back on. I can also turn the fan off when running by bypassing...

Upper radiator hose is hot and has pressure in it. Put my original fan sensor back in with the same volatage monitoring setup. Fan off initially, power on both sides of sensor. When my temp gauge gets up just above 220 fan comes on and I see the voltage go away on one side of sensor. Fan...

I replaced the fan sensor and it does not appear to operate at the right temperature range

What I can't get past is that if bypass the fan switch and close/open the connection manually the fan works as it should. Here's some pictures of my test and the new fan sensor I purchased.

Based on the temperature gauge my fan used to cycle on about 220 and then off around 210. Then it started cycling on and off once then stayed on all the time. Based on my troubleshooting it appeared that the fan sensor on the water bridge was not working properly. When cold fan was off...

Spent all day last Thursday at the yard. As has been said many times before Glen is a pleasure to deal with. Looking forward to my next trip up there.

What would be the cost on a complete gun mount?

I had the same issue and still have not fixed the problem, bypassed FDC, replaced the rings on flame heater, replaced O-rings on HH and shut off. Next on the list is the boost pump seal.

Great Information! This is exactly what I need to do to my truck. Think I can handle the pressure washing, but have never painted anything except with rattle cans. Is the green degreaser you use something like simple green or is it from flynns as well? What ratio did you mix? Any special...

Ken responded to my PM and refunded my money since the group buy never happened. I appreciate him trying to put it together and would have preferred it happen, but it didn't. I'm pleased with the outcome.

Has anyone heard from Ken on this HH group buy? I sent him a check almost a year ago and have yet to hear anything. To date everyone I've dealt with on SS has been above board. I hope this one turns out the same way.

Just for the record, donation was made.

1992 BMY M923A2 a. Serial Number (VIN number) : 2307843 b. Registration Number : NL156Q c. NSN without dashes : 2320012300307 d. Where you bought it : Sparta, WI e. Bumper numbers : Driver Side Front PS407 Driver Side Rear 88C-R 310QM Passenger Side Front 88C-R 319QM Passenger Side Rear 1751...

Misson Accomplished! Home safe and sound with no issues. 400 miles with one stop at Pauls Valley, OK. Fittingly 1/2 hour from home another thunderstorm to drive in, but we need the rain. Would be nice if the wiper wiped where I'm looking instead of over to the right. Guess I need to be 6...

The first day is done. Jeff picked me up at the airport last night (flights delays caused me to be 2 hours later than planned), dropped me at a motel. This morning he picked me up and went over to his house to get the truck. Checked it over, took off the cargo cover, and then headed west...

I'm flying up tomorrow and heading back Friday.